2022 Kia Telluride Sx on 2040-cars

Auto blog

US expands probe into ZF-TRW airbag failure-to-deploy to 12.3 million vehicles

DETROIT — U.S. auto safety regulators have expanded an investigation into malfunctioning airbag controls to include 12.3 million vehicles because the bags may not inflate in a crash. The problem could be responsible for as many as eight deaths. Vehicles made by Toyota, Honda, Kia, Hyundai, Mitsubishi and Fiat Chrysler from the 2010 through 2019 model years are included in the probe, which was revealed Tuesday in documents posted by the National Highway Traffic Safety Administration. It involves airbag control units made by ZF-TRW that were installed in the vehicles. The control units can fail in a crash, possibly because of unwanted electrical signals produced by the crash itself that can disable an air bag control circuit housed in the passenger compartment, according to NHTSA documents. The electrical signals can damage the control circuit, the documents say. ZF, a German auto parts maker which acquired TRW Automotive in 2015, said in a statement that it's committed to safety and is cooperating with NHTSA and automakers in the investigation. The case is another in a long list of problems with auto industry airbags, including faulty and potentially deadly Takata airbag inflators. At least 24 people have been killed worldwide and more than 200 injured by the inflators, which can explode with too much force and hurl dangerous shrapnel into the passenger cabin. The inflators touched off the largest series of automotive recalls in U.S. history involving with as many as 70 million inflators to be recalled by the end of next year. About 100 million inflators are to be recalled worldwide. On April 19, NHTSA upgraded the ZF-TRW probe from a preliminary evaluation to an engineering analysis, which is a step closer toward seeking recalls. So far, only Hyundai and Kia and Fiat Chrysler have issued recalls in the case. Four deaths that may have been caused by the problem were reported in Hyundai-Kia vehicles and three in Fiat Chrysler automobiles. NHTSA opened an investigation in March of 2017 involving the TRW parts in Hyundais and Kias. The upgrade came after investigators found two recent serious crashes involving 2018 and 2019 Toyota Corollas in which the airbags did not inflate. One person was killed. Jason Levine, executive director of the Center for Auto Safety, a nonprofit consumer group, said the ZF-TRW case shows the auto industry thus far has learned very little from Takata.

Kia Niro shares Hyundai Ioniq parts, could become an EV

It's time for the Chicago Auto Show, so it's no surprise that Kia has warmed up the chilly February air here with a green vehicle debut. This year it was the Niro, the brand's first dedicated hybrid, and it follows past Chicago debuts like the Soul EV and the Optima Hybrid. Like those vehicles, the Niro is not going to take long to get from the concept stage to showroom. Steve Kosowski, Kia Niro project manager, told AutoblogGreen that the first Niro hybrids will arrive in all 50 US states in about 11 months. The Niro will only be offered as a hybrid – both with a plug and without – but Kosowski could not say when the PHEV will arrive, other than, "a little later in the lifecycle." The standard hybrid will be certified as a 2017 model-year vehicle, but the PHEV might become a 2018, or even later. A PHEV will arrive "a little later in the lifecycle." Kia is on a mission (with Hyundai, see below) as it develops the Niro to get incredibly high fuel economy. Kosowski said that the defining mantra was, "Let's see what we can do when the resources are focused on hitting 50 miles per gallon and the only way the car is going to be built is with an electrified powertrain," he said. View 18 Photos Knowing that the Niro would have a battery allowed Kia and Hyundai engineers to plan things out together, because the Niro will share a lot of components with the upcoming Hyundai Ioniq. "The whole powertrain is essentially shared between the two," Kosowski said. "There are a few little tuning differences, but it's a 1.6 GDI, four-cylinder from the Kappa engine family that is the basis for both cars. The motor is sandwiched between the engine and the transmission, there's a clutch there. And the DCT is also shared between both cars." They both ride on the same 103-inch wheelbase, and the track width is similar as well. There might be some changes with the ratios and the tunings, Kosowski said, but the two companies are obviously working together to make these two vehicles very real, very soon. The main difference between the Niro and the Ioniq that the Kia is a CUV while the Hyundai is a sedan. "The market for electrified vehicles is changing rapidly." - Steve Kosowski Going into the process with electrification in mind meant "that the engineering, the platform layout, the way the car crashes, the way the car comes together, the way the car is assembled, all of that is engineered around having a battery," Kosowski said.

Kia reveals facelifted 2017 Cadenza

Kia has revealed a facelifted version of its Cadenza sedan. Little in the way of technical details were released to accompany these two images of the model known in its home market as the K7. However the updated model "maintains the progressive, contemporary image of the current model" with "sharper, more defined lines and wider, lower stance" compared to the existing version. Previewed in a trio of teaser renderings just weeks ago, the new Cadenza adopts a more sharply-creased appearance. Kia says that the "long [hood], gently rising shoulder line and swept-back roofline give the car a sleek, elongated silhouette." Those lines are complemented by a a window line that rises towards the rear into a sharp kick upwards in the C-pillar, with the brand's signature tiger-nose grille flanked by wraparound LED headlamps, more muscular fenders, squared-off bumpers, wide LED taillamps, and dual exhaust tips. The new Kia Cadenza is set to reach showrooms around the world in the new year ahead. The current model shares its underpinnings with the Hyundai Azera, and was introduced in Korea in 2010 before arriving in North America in 2013. The version we currently get in the United States is powered by a 3.3-liter V6 producing 293 horsepower and 225 pound-feet of torque, mated to a six-speed automatic transmission. Purposeful design for all-new Kia Cadenza - Sharper, more defined styling for Kia's full-size sedan - Distinctive, European-inspired looks with a sleek, elongated silhouette - Bold new model maintains the progressive image of existing Cadenza, promising greater refinement and luxury - On sale in overseas markets in 2016 (SEOUL) November 24, 2015 – Kia Motors has today revealed the updated exterior styling of the Korean domestic market all-new Kia Cadenza (known as 'K7' in Korea) in the first official photos of the new model. The all-new Cadenza boasts a purposeful new design and will feature high levels of interior quality and contemporary luxury when it goes on sale in overseas markets in 2016. The next-generation Cadenza maintains the progressive, contemporary image of the current model, and the sharper, more defined lines and wider, lower stance give the new model a modern and thoroughly distinctive new look – with key design elements ensuring the new Cadenza remains recognizable as a Kia.