2022 Kia Sportage Nightfall on 2040-cars

Auto blog

Kia recalls 12k 2016 Sorento models for faulty accelerator pedal

Kia is recalling 12,361 examples of the 2016 Sorento in the US because the accelerator pedal may stop working correctly. All of the affected vehicles were made between October 27, 2014, and January 29, 2015. According to the recall documents submitted to the National Highway Traffic Safety Association, a capacitor on the circuit board for the accelerator assembly may be improperly soldered. This can trigger a fault, causing the 2016 Sorento enters Limp Home Mode or in some other cases go into Forced Idle Mode, which only allows idling speed. In either situation, the check engine or electronic stability control lights would likely illuminate, according to Kia. Still, if this fault occurs, the lack of acceleration can put drivers in danger. To repair things, Kia will replace the entire accelerator pedal assembly with an improved unit. Changing out the parts will take about an hour, and obviously this will be done at no cost to owners. According to the NHTSA documents, there have been no accidents or injuries as a result of this problem. You can also read Kia's FAQ to owners and the full report on the recall in PDF format, as well. Related Video: RECALL Subject : Vehicle may not be able to Accelerate Report Receipt Date: FEB 13, 2015 NHTSA Campaign Number: 15V089000 Component(s): VEHICLE SPEED CONTROL Potential Number of Units Affected: 12,361 All Products Associated with this Recall Vehicle Make Model Model Year(s) KIA SORENTO 2016 Details Manufacturer: Kia Motors America SUMMARY: Kia Motors America (Kia) is recalling certain model year 2016 Sorento vehicles manufactured October 27, 2014, to January 29, 2015. Due to an improperly soldered component in the accelerator pedal assembly, the driver may not be able to accelerate the vehicle. CONSEQUENCE: If the vehicle is unable to be accelerated, there is an increased risk of a crash. REMEDY: Kia will notify owners, and dealers will replace the accelerator assembly, free of charge. The recall is expected to begin in February 2015. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC115. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Kia recalls 9,700 new Sorento models for potential front axle failures

Kia has announced a recall on the 2014 Sorento due to an issue that could lead to a broken right front driveshaft on certain models. Only models equipped with the 2.4-liter inline four-cylinder engine and front-wheel drive are affected by the campaign.
The National Highway Traffic Safety Administration says that Sorento models built between January 7 through March 12 of this year may experience broken axle shafts that could lead to loss of power or cause the vehicle to roll if parked. According to the Detroit Free Press, a total of close to 9,700 units are being recalled, but that number is closer to 9,300 for customers in the US.
Kia says that it has had one incident with an internal vehicle that experienced a separated axle shaft in addition to 10 related warranty claims, but it says no accidents or injuries have been reported. The recall campaign will begin next month. Scroll down for the NHTSA recall notice as well as an official statement from Kia.

Hyundai and Kia introduce new predictive transmission tech

Hyundai and Kia have announced that the two have developed a new transmission control system that optimizes shift logic to both improve efficiency and reduce "gear hunting." The system utilizes real-time traffic data, built-in 3D navigation and the same sensors that feed the cars' advanced safety and driver assist tech to proactively choose the right gear — even neutral in some cases — to reduce both fuel consumption and wear-and-tear. The Korean sister brands call it the "Information Communication Technology Connected Shift System," or "ICT" for short, and Hyundai says it delivers not just improved frugality, but a better all-around driving experience. ICT programming allows the transmission control unit to collect and interpret traffic, camera, sensor, navigation route, elevation and topographical data.  "Using all of these inputs, the TCU predicts the optimal shift scenario for real-time driving situations through an artificial intelligence algorithm and shifts the gears accordingly," the announcement said. "For example, when a relatively long slow down is expected and radar detects no speed irregularities with the car ahead, the transmission clutch temporarily switches to neutral mode to improve fuel efficiency." While this sounds like a primarily green play, there are quality-of-life improvements too. For example, ICT can also optimize gear selection and shift points for safer highway merges, effectively implementing the equivalent of a "Sport Mode" driving profile when a little extra punch is called for.  Hyundai says the resulting decrease in shifts was significant; in some test scenarios, such as roads with lots of curves, the number of shifts executed by the transmission was reduced by almost half. As an added bonus, these vehicles also utilized their brakes less often (11%), which would reduce wear (and accompanying maintenance costs) over time.  ICT is somewhat future-proof, too, as it was developed to incorporate vehicle-to-vehicle (V2V) data should such networks improve down the line.  The announcement did not say when the new tech would reach customers, committing only to introducing the technology "on future vehicles." If we're betting, the smart money says it will probably on a new Genesis model and trickle down from there. Related Video: