Kelvar Suv 2014 Wrangler Unlimited Leather Nav Backup Camera Bluetooth on 2040-cars

Auto blog

FCA recalls 1.1 million vehicles worldwide due to confusing shifter

Fiat Chrysler is recalling 1.1 million vehicles worldwide to address the problematic shifter used on cars with eight-speed automatic transmissions. The issue is that the console-mounted shifter acts like a rocker switch and always returns to the middle position after moved. This has been deemed confusing to drivers – confusing enough to cause some to exit their vehicles without first selecting Park and leading to the car rolling away. FCA says 41 injuries are related to the shifter problem, and no evidence of equipment failure has been found. The company will enhance warning chimes and alter the shift strategy, meaning alert messages will be displayed in case the driver door is opened while the engine is running. With the door open, the transmission will prevent the car from moving even if Park is not selected. The affected vehicles are certain model-year 2012–2014 Dodge Charger and Chrysler 300 sedans, as well as model-year 2014–2015 Jeep Grand Cherokee SUVs, an estimated 811,586 US vehicles in total. The recall also affects 52,144 vehicles in Canada, 16,805 in Mexico, and 248,667 vehicles elsewhere. The shifter is used with ZF-designed and ZF-built eight-speed automatic; Audi uses a similar shifter setup in some of its vehicles, including the current-generation, which predated Chrysler's use of it. Chrysler uses a different, a rotating-dial-type shifter on eight-speed-equipped Rams. The company moved away from the problem shifter design in 2015 for the Charger and 300, and the Grand Cherokee's shift lever was modified for 2016. Owners of affected vehicles will be notified of the recall when service is available. Fiat Chrysler urges customers to follow the instructions in the vehicle's owner's manual in the meantime. Related Video: News Source: FCAImage Credit: AOL Recalls Chrysler Dodge Jeep RAM Ownership Safety SUV Sedan

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Jeep idles second shift it hired a month ago for 2014 Cherokee

In an unusual move, Chrysler is idling its recently hired second shift of 2014 Jeep Cherokee builders because, Chrysler spokeswoman Jodi Tinson said in a statement, it already has built the "critical number of vehicles we need to stock dealerships once containment is released," Automotive News reports.
After the "critical" 9,430 Cherokees were built, the layoff was enacted so as not to strain the automaker's logistics partners before the Cherokee is actually released. Chrysler says the temporary layoff will last about two weeks, with 500 workers out of work and another 600 reassigned at the Toledo Assembly Complex where the sports utility vehicle was being built. The second-shift workers were hired on August 19.
Chrysler previously insisted that it would release the Cherokee to dealerships by the end of the third quarter, and it initially planned to start selling the SUVs in mid-August. Apparently the Cherokee needed a software fix before hitting showrooms, which is how Chrysler explains why the release schedule is out of whack. We're thinking that this software fix addresses the "powertrain calibration" issue that delayed the first media test drives of the model. According to the Toledo Blade, Chrysler has admitted it is doing "extended quality validation testing" but refused to provide more information.