2023 Jeep Wagoneer Series I 4x4 on 2040-cars

Auto blog

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Jeep driver nearly gets washed away by fast moving river

Just because you can do something doesn't mean that you should. For example, you should never attempt to cross a fast-moving river in a bone stock Grand Cherokee no matter how shallow the river looks. Especially if you don't know what you're doing. A video posted recently to the Facebook group Jeep EXPERIENCE, shows an inexperienced jeep driver learning that lesson the hard way. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The video starts innocently enough, with a group of off-roaders watching one of their friends attempt to ford a shallow looking river. Things quickly go sideways however, when the driver of the silver Grand Cherokee just plunges right in and quickly gets in over his head. The river is moving faster than the driver thinks it is, the driver panics, makes some bad decisions, then the jeep is turned over and swept downstream. Eventually, the jeep is hauled out by a Land Rover after a long comedy of errors that involves one guy losing his trousers to the current and the Cherokee ingesting untold gallons of water. What went wrong here? Well, It's pretty obvious from the video that the Cherokee driver didn't have a clear idea of where he was going or about the condition of the riverbed. He chickened out halfway across the river, and in what appears to be a misguided attempt at turning back, he reverses, digs himself deeper in the riverbed, then turned broadside on into the current. When he changes his mind again and decides to just gun it for the opposite shore, he drives directly into a deep water hazard that would have been obvious to an experienced off-roader. At that point the jeep and the driver were doomed. Hopefully the driver learned a lesson here, and hopefully he didn't pollute that river too much with the jeep's fluids. Related Video: News Source: Jeep EXPERIENCE Weird Car News Jeep Land Rover Driving Safety SUV Off-Road Vehicles Videos river

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights