One Owner, Rear Entertainment One Of A Kind Clean Non Smoke on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Chrysler resolves recall issue with NHTSA, will inspect, upgrade affected Jeeps

Chrysler made big news earlier in the month by refusing a recall request from the National Highway Traffic Safety Administration for the 1993-2004 Jeep Grand Cherokee and 2002-2007 Jeep Liberty. Last week, NHTSA boss David Strickland countered by defending his agency's request for the recall of 2.7 million Jeep SUVs. Today marked the deadline for Chrysler to formally respond to NHTSA, and it seems that both parties have met in the middle with Chrysler inspecting and upgrading some of the affected vehicles without using the word "recall," which would constitute the admission of a defect; instead, Chrysler said that it is conducting a "voluntary campaign."
At issue on these vehicles is the positioning of the fuel tank behind the rear axle that could get damaged during a rear-end collision. NHTSA has stated that at least 51 people have been killed in rear-end collisions involving these Jeeps after the vehicles caught fire, to which Chrysler countered by pointing out that both models "met and exceeded" the requirements for fuel-system integrity.
As a compromise on the situation, Chrysler says that it will inspect all pre-2004 Grand Cherokees and pre-2007 Liberty models and, "if necessary, provide an upgrade to the rear structure of the vehicle." According to Automotive News, this upgrade will consist of adding a trailer hitch that will presumably better protect the rear-mounted gas tank. Vehicles already equipped with a factory or Mopar hitch will not be modified. Chrysler's official statement on the matter is posted below, but no additional information has been released, such as when the campaign will begin and how many vehicles could be affected.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.