2003 Jeep Grand Cherokee Limited Sport Utility 4-door 4.7l on 2040-cars

Auto blog

Here are all the vehicles sold by the 12 brands of the Fiat Chrysler PSA merger

Sven Gustafson and Ronan Glon contributed to this report. Whether or not the formal merger between Italian-American automaker Fiat Chrysler and European conglomerate PSA Group means the return of Peugeot to the U.S., one thing’s for certain: The combined company will have a truckload of different brands. Sorting out what the deal means for all of them, including where they are sold and built, and whether and where there is product overlap, will be a key question for the two companies as they formalize the merger over the next 12 to 15 months. So far, both sides have steadfastly insisted that no job cuts or plant closures will result from the tie-up. WeÂ’ll see about that. In the meantime, weÂ’ve compiled an alphabetical list of all the vehicles currently sold in Europe and in North America by the various FCA and PSA brands, along with the years they debuted. We've gone into more detail about the European vehicles you might be less familiar with. The joint empire also has an antique store's worth of heritage-laced models and dormant brands, like Plymouth, Imperial, Simca, and Panhard, and it would have been even bigger had FCA not spun off Ferrari in early 2016. Alfa Romeo A legacy Italian sports car brand with roots in racing, Alfa Romeo has been struggling with declining U.S. sales. Giulia (2015): AlfaÂ’s rear-wheel drive sports sedan competes against German luxury sedans in North America and Europe. 4C (2013): The lightweight mid-engine rear-wheel-drive sports car is being phased out. Stelvio (2016): The Stelvio is a small luxury performance crossover that competes against the likes of the Porsche Macan and BMW X3 and is sold in both Europe and North America. Giulietta (2010): Sold in Europe, this compact hatchback is AlfaÂ’s entry-level model. After initially planning a rear-wheel drive 2020 update, the Giulietta is reportedly being nixed as part of FCAÂ’s latest product plans.   Chrysler Despite lending its name to its parent company, questions abound about the future of this legendary but faded brand, which is not offered in Europe. 300 (2011): Despite rumors of its pending demise, the four-door sedan lives on mostly unchanged for the 2020 model year, at least. Pacifica (2016): The successor to the Town & Country is ChryslerÂ’s bestselling model by a long shot and comes in gas-only and plug-in hybrid versions. Voyager (2019): ChryslerÂ’s newest minivan launches as its entry-level minivan for the 2020 model year.

FCA recalls 894k total vehicles worldwide in two campaigns

FCA is recalling a total of 893,698 vehicles worldwide in two campaigns to fix problems with inadvertent airbag deployment, failure of the anti-lock brakes, and stability control systems in the Jeep Grand Cherokee, Liberty, Dodge Journey, and Fiat Freemont. 559,703 of these vehicles are in the US. The larger recall affects 284,089 examples of the 2003 Jeep Liberty and 2004 Jeep Grand Cherokee, and there are also 13,411 of them in Canada, 6,277 in Mexico, and 48,212 outside the NAFTA region. Because of "electrical noise beyond the tolerance of the airbag electronic control module", part of that component can fail, according to the National Highway Traffic Safety Administration. This can cause the front and side airbags to deploy and the seatbelt pre-tensioners to activate inadvertently. FCA US has seven reports of alleged injuries from this problem. To fix the situation, the Jeeps need their Occupant Restraint Control modules replaced, as well as the front- and side-impact sensors. According to the NHTSA, the replacement parts won't be available until early 2016. Still, FCA US will advise owners about the problem in a letter by the end of December and will send a second notification when the components are ready. The second campaign affects 275,614 examples of the 2012-2015 Dodge Journey in the US; plus 78,148 of them in Canada, 36,471 in Mexico, and 151,476 left-hand drive units outside of NAFTA where it's sold as the Fiat Freemont. On these vehicles, water intrusion can disable the anti-lock brakes and electronic stability control, although a warning light often illuminates when this issue occurs, and the problem doesn't affect regular braking. There are also no reports of injuries or accidents. To fix the issue, dealers will seal the ABS wiring harness and will replace any already affected components as necessary, like the ABS module or the headlamp and dashboard wiring harness. Statement: Occupant Restraint Control Modules October 30, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 284,089 older-model SUVs in the U.S. to replace their Occupant Restraint Control (ORC) modules and front and/or side-impact sensors, as required. Within this vehicle population, FCA US became aware of seven injuries caused by inadvertent air-bag deployments and advised NHTSA accordingly. The affected vehicles are not equipped with Takata Corp. air-bags. The Company is unaware of any related accidents.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.