1995 Jeep Grand Cherokee Laredo Sport Utility 4-door 4.0l on 2040-cars

Auto blog

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.