1975 Army Jeep Show Condition .restored ,very Correct on 2040-cars

Auto blog

Jeep idles second shift it hired a month ago for 2014 Cherokee

In an unusual move, Chrysler is idling its recently hired second shift of 2014 Jeep Cherokee builders because, Chrysler spokeswoman Jodi Tinson said in a statement, it already has built the "critical number of vehicles we need to stock dealerships once containment is released," Automotive News reports.
After the "critical" 9,430 Cherokees were built, the layoff was enacted so as not to strain the automaker's logistics partners before the Cherokee is actually released. Chrysler says the temporary layoff will last about two weeks, with 500 workers out of work and another 600 reassigned at the Toledo Assembly Complex where the sports utility vehicle was being built. The second-shift workers were hired on August 19.
Chrysler previously insisted that it would release the Cherokee to dealerships by the end of the third quarter, and it initially planned to start selling the SUVs in mid-August. Apparently the Cherokee needed a software fix before hitting showrooms, which is how Chrysler explains why the release schedule is out of whack. We're thinking that this software fix addresses the "powertrain calibration" issue that delayed the first media test drives of the model. According to the Toledo Blade, Chrysler has admitted it is doing "extended quality validation testing" but refused to provide more information.

2014 Easter Jeep Safari kicks off with six concepts

The 2014 Easter Jeep Safari is set to begin this weekend in Moab, Utah, and while it's sure to be a blast for Jeep enthusiasts from all corners of the world, we're looking forward to the wild, off-road ready concepts that Jeep will be bringing to the red rocks. As you can see in our handy headline, there are six such vehicles in total, each of which sports a variety of tweaks and custom bits.
Unlike in years past, where Jeep graced us with some outrageous concepts like the Mighty FC or J-12, this year's vehicles are a bit more restrained and a bit more buildable by enthusiasts. That's not by accident, officials tell us. They wanted to put this year's focus on attainable vehicles and accessories from Mopar and Jeep Performance Parts that existing owners can use to augment their own vehicles. So let's get to it.
We'll start with the Wranglers first. There are three concepts of the jeepiest of Jeep coming to Moab - the Level Red, Maximum Performance and Mojo. The Level Red and the Mojo (seen above) are similar from a suspension and engine standpoint. Both boast a two-inch Jeep Performance Parts lift kit, which officials tell us is coming to market in the next few months. There are a pair of Dana 44 crate axles on both the front and rear, while a Jeep Performance Parts Rock-Trac transfer case has been fitted. The 3.6-liter V6 engines on both Jeeps can breathe a bit easier thanks to a new cold-air intake and exhaust system.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.