Find or Sell Used Cars, Trucks, and SUVs in USA

1974 Jeep Dj5 Mail Truck 258 Amc 3 Speed Automatic Ready To Work No Reserve on 2040-cars

Year:1974 Mileage:159000
Location:

Prescott, Arizona, United States

Prescott, Arizona, United States
Advertising:

For sale is a 1974 DJ 5 Postal Jeep with right hand drive. It has a 258 AMC 6 cylinder engine with 59,000 miles on rebuild. It has a 727 Chrysler 3 speed automatic transmission. This Jeep runs and drives good. It still has the original mail tray on the left hand side. It has a few dents and dings but nothing serious. The fenders has some stress cracks. Got this jeep from a gentleman that got it for his son and his son got in trouble and it sat in his yard and we bought it from the gentleman. Has the aluminum front hubs without the 4 wheel drive gears. We put in a new starter and solenoid, a marine battery, rebuilt the carburetor, replaced ballast resistor and clean out gas tank. So it is ready to work for you. This is a local pick up only at my location in Prescott, AZ. You can also call with any questions at 606-657-6012.

Auto Services in Arizona

Wright Cars ★★★★★

Automobile Body Repairing & Painting
Address: 1109 N Sickles Dr, Mesa
Phone: (480) 424-4938

World Class Automotive Repair ★★★★★

Auto Repair & Service
Address: 8139 E Main St # 9, Queen-Creek
Phone: (480) 380-6700

Walt`s Body & Paint, LLC ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 11241 E Apache Trl, Tortilla-Flat
Phone: (480) 343-8251

Upark We Sell IT ★★★★★

Used Car Dealers
Address: 1411 W Broadway Rd, Tempe
Phone: (480) 461-1000

Tristan Express Auto Sales ★★★★★

New Car Dealers
Address: 4505 W Glendale Ave, Tolleson
Phone: (623) 934-2886

Superstition Springs Lexus ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 6206 E Test Dr, Apache-Jct
Phone: (480) 324-8900

Auto blog

Stellantis reports surprising 2020 results, is 'off to a flying start'

Wed, Mar 3 2021

MILAN — Low global car inventories and cost cuts should boost Stellantis's profit margins this year, though a shortage of semiconductors and investments in electric vehicles could weigh on results, the newly-formed automaker said on Wednesday. The forecast came as Stellantis, created by the January merger of Peugeot-maker PSA and Fiat Chrysler (FCA), reported better-than-expected results for 2020 that sent its shares up around 3% in morning trading. "Stellantis gets off to a flying start and is fully focused on achieving the full promised synergies (from the merger)," Chief Executive Carlos Tavares said in a statement. Stellantis is the world's fourth largest carmaker, with 14 brands including Fiat, Peugeot, Opel, Jeep, Ram and Maserati. It said 2021 results should be helped by three new high-margin Jeep vehicles in North America and a strong pricing environment there. The U.S. market has driven profits for years at FCA and starts off as the strongest part of Stellantis. The group's guidance assumes no more significant lockdowns caused by the global COVID-19 pandemic, which shuttered auto plants around the world last spring. Stellantis should also get a lift as its starts to implement a plan aimed at delivering over 5 billion euros a year in savings, without closing any plants. Tavares has also pledged not to cut jobs. But a pandemic-related global shortage of semiconductors, used for everything from maximizing engine fuel economy to driver-assistance features, could hurt business. Auto industry executives have said the shortage should ease by the second half of 2021. Stellantis said its "electrification offensive" could also weigh on results this year. Automakers are racing to develop electric vehicles to meet tighter CO2 emissions targets in Europe and this week Volvo joined a growing number of carmakers aiming for a fully-electric line-up by 2030. Stellantis plans to have fully-electric or hybrid versions of all of its vehicles available in Europe by 2025, broadly in line with plans at top rivals such as Volkswagen and Renault-Nissan, although Stellantis has further to go to meet that goal. The carmaker is targeting an adjusted operating profit margin of 5.5%-7.5% this year. That compares with a 5.3% aggregated margin last year: 4.3% at FCA and 7.1% at PSA excluding a controlling stake in parts maker Faurecia, which is set to be spun-off from Stellantis shortly.

Sergio rethinks FCA-GM merger idea, dismisses critics

Sat, Dec 5 2015

After many public overtures, Fiat Chrysler Automotive CEO Sergio Marchionne has claimed his company won't be making a hostile takeover bid for General Motors. This is despite widespread speculation that FCA's desire to merge was motivated by its allegedly dire situation. As one unnamed GM exec who spoke to Automotive News earlier this year put it, "Why should [GM] bail out FCA?" "We are not choking. We are in relatively decent shape," Marchionne told journalists attending an FCA shareholder meeting in Amsterdam, AN reports. "We have been publicly rebuffed, we have been rejected and you cannot force these things. I don't want to. At the moment, we have no intention to do anything hostile." Instead of focusing on merging with GM, or any other partners for that matter, FCA will refocus on implementing its ambitious five-year investment plan, which would see it dump $52 billion into its various brands, with a particular focus on Alfa Romeo, Maserati, and Jeep. So far the attempt has largely been unsuccessful, especially as it relates to the Italian brands. Earlier this week, additional reports emerged that claimed Alfa was pushing back the Giulia and an unnamed CUV while reassigning resources to updated versions of the Giulietta and MiTo hatchbacks. This is not the first time we've heard about trouble for the Giulia, of course. For Masearti, though, it was the first we'd heard of delays for Alfieri sports car, which allegedly won't appear in 2016, as promised. We can expect a proper breakdown of FCA's adjusted plans when Marchionne and Company reveal an updated product slate next month. Related Video: The video meant to be presented here is no longer available. Sorry for the inconvenience. News Source: Automotive News - sub. req.Image Credit: Paul Sancya / AP Alfa Romeo Chrysler Fiat GM Jeep Maserati Sergio Marchionne FCA

Jeep Wrangler likely to get aluminum body, will stay in Toledo

Mon, 27 Oct 2014

Perhaps more than any other vehicle currently for sale in the United States, the Jeep Wrangler is viewed by purist fans as a vehicle that simply must maintain the status quo. In this case, that means a body-on-frame design, solid axles, a relatively large engine sitting up front and a removable top. It's always been that way, and it always will be.
Maybe.
According to the most recent reports, the next-generation Jeep will continue to soldier forth with a full steel chassis underneath its stamped bodywork. The biggest change, reports Automotive News, will be that said panels will be hewn from aluminum instead of steel, a seismic shift of a transition not unlike what's happened with the new Ford F-150. Because it won't be a unibody, the SUV will likely continue to be assembled in Toledo, OH as it (almost) always has been - the latter has been a source of heartburn in recent weeks for the Northwestern city in the Buckeye State.