2001 Jeep Cherokee Sport Sport Utility 4-door 4.0l Low Miles! Baja Claws! 4x4! on 2040-cars

Auto blog

Alfa Romeo will gain a Jeep Compass-based SUV

It was reported earlier this week that FCA would invest into its Italian factories to ramp up production at currently underutilized locations. Those plans have now been clarified with official information from FCA, as reported by Automotive News. The entire investment is worth $5.7 billion. First of all, Alfa Romeo will gain a new compact SUV based on the Jeep Compass architecture. The still-unnamed model will be available as a plug-in hybrid, and it will be built in Pomigliano, Italy. No U.S. availability has yet been announced, but it would not be odd to see the Compass-based model sold below the Stelvio in the States. The last time Alfa Romeo had anything similar in its model portfolio was when it offered Crosswagon-badged four-wheel-drive versions of the 156 and 159 wagons. As for the Jeep Compass itself, it will begin to be built at the Melfi plant in Italy. The rumored small "baby" Jeep slotting under the Renegade has not yet been officially mentioned. Fiat will introduce a battery electric 500, built in Turin, and the Pomigliano plant that will make the compact Alfa Romeo SUV will also be used to build a mild hybrid version of the Panda city car. The 500X will gain a PHEV variant. The Stelvio platform will also spawn a corresponding SUV for Maserati, and FCA also mentioned Maserati will introduce a new, unnamed model it will make in Modena. Automotive News quotes Italian press as saying this will be the Alfieri coupe and convertible, also offered as battery electric versions. Related Video:

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.