2001 Jeep Cherokee Sport 4.0l 4x4 on 2040-cars

Auto blog

FCA recalling 323,000 cars for wiring, software issues

The Basics: Fiat Chrysler Automobiles (FCA) is conducting a voluntary recall for an estimated 323,361 cars in the US. The affected vehicles were built after September 23, 2014 and include: the 2015 Chrysler 200, Ram ProMaster City, Jeep Renegade, and 2014 and 2015 Jeep Cherokees. The Problem: An insufficient crimp in the vehicles' wiring harness may result in a solenoid fault code, which could cause the engine to stop. The loss of power could lead to an accident. Injuries/Deaths: None reported. The Fix: FCA will update the affected vehicles' software and replace wire harnesses, as needed. According to FCA, owners that experience the problem can temporarily resolve the issue by restarting the vehicle. If you own one: FCA is reaching out to owners to schedule a service. Related Video: Statement: Wire Harness Crimp July 22, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 323,361 vehicles in the U.S. to update certain software and replace wire harnesses, as needed. An examination of warranty data led to an FCA US investigation that discovered an insufficient crimp in a wire harness. Such a crimp may lead to a solenoid fault code that can cause propulsion loss. The Company is unaware of any related injuries or accidents. Most vehicles in the recall population will not experience this fault code over their lifetimes. However, should the condition occur, it can typically be temporarily resolved by stopping the vehicle and re-starting its engine. Accordingly, FCA US urges customers to heed the instructions on their recall notices. Affected are certain model-year 2015 Chrysler 200 midsize sedans, Ram ProMaster City small vans, Jeep Renegade and Cherokee SUVs. Certain model-year 2014 Cherokees are also affected. A change made in the harness-manufacturing process eliminates the need to recall any vehicle built after Sept. 23, 2014. An estimated 35,511 additional vehicles in Canada are included in the campaign; as are 7,067 in Mexico; and 43,927 outside the NAFTA region. Customers will be advised when they may schedule service. Those with questions may call the FCA US Customer Care Center at 1-800-853-1403. News Source: FCAImage Credit: AOL Recalls Chrysler Jeep RAM FCA jeep renegade ram promaster city

Jeep CEO a fan of pickup redux

The idea of a Jeep pickup is a hardly a new concept. After all, putting a bed on the company's rugged off-roaders goes back to the '40s, not to mention the more recent Cherokee-based Comanche. There's a very slim chance that a truck could return to the lineup down the line if brand CEO Mike Manley gets his wish. "I remain a big fan of a Jeep pickup. I think we have history that says it belongs in our portfolio," Manley said to The Detroit News. However, there's no need to get any hopes up soon, because a truck doesn't get any mention in the brand's five-year plan. That puts the earliest possible introduction around 2019. Even Manley is tempering expectations. "At this moment and time, I have higher priorities. That doesn't mean to say that we don't work on it, we're not looking at it," he said to The Detroit News. The most likely candidate to support a future Jeep truck is the next-gen Wrangler, according to The News. The rest of FCA's pickups and SUVs are running at capacity, which makes slipping in another variant difficult. However, the future Wrangler is heavily rumored to get an expanded production facility in Toledo, OH, which could make things possible. Anonymous FCA insiders confirmed to Autoblog that the next-gen Wrangler would be offered with a 3.0-liter EcoDiesel V6 and eight-speed automatic. It's also reportedly using solid axles at the front and rear, a fixed windshield and an aluminum body. That could make for a very fun and practical off-roader. If reading all of this speculation gives you a twinge of deja vu, it should. After the Jeep Gladiator concept (pictured above), there were years of speculation about the brand bringing the pickup back. Even then the plan was for a compact truck to tackle that hole in the segment. It was even believed that the project had a green light for production seemingly with Sergio Marchionne's blessing. Then things were pushed back, and last year, the idea was officially quashed. Related Video:

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.