No Reserve 2007 Sahara Unlimited Hard Top 4x4 Alloys Runs Great Well Serviced on 2040-cars

Auto blog

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.

Chrysler readying 20 Moparized vehicles for SEMA

The Las Vegas Convention Center has plenty of space for aftermarket companies and automakers to show off their wares, and it looks like Chrysler is taking advantage of the spacious floor plan. At next month's SEMA Show, Chrysler will have a full 20 cars from its six brands decked out with Mopar gear.
As a hint of what is to come, Chrysler released a handful of teaser sketches showing glimpses of modified Jeep Cherokee, Ram 1500, Fiat 500L and Chrysler 300 concept vehicles. The automaker will also use the venue to show off a new line of Jeep Performance Parts offered by the all-new Mopar Off-Road Division. In addition to the images, Chrysler also issued a brief press release - posted below - breaking down some of the "industry-first features" that Mopar has offered in recent years.