Jeep Wrangler Sport 4.0 Litre Hardtop 4x4 5 Speed Free Shipping To Your Door! on 2040-cars

Auto blog

Dirt Every Day tries to find the best 4x4 for under $4k

If you want to build a cheap truck that can still do dirty deeds off the beaten path, it's best to start with solid axles and a solid V8 engine. That sums up the lessons learned after watching the 2014 Cheap Truck Challenge from the Dirt Every Day video crew, who took to the deserts and surrounding areas near Reno, NV, in an attempt to find the best 4x4 for under $4,000. Fortunately for us, the whole sordid journey was captured on video.
This isn't the first time the boys from DED filmed a Cheap Truck Challenge, and this year's festivities pitted together a 1993 Chevy S10 pickup, a 1995 Jeep Grand Cherokee and a 1975 International truck in a series of challenges ranging from donuts to drag races, with plenty of hill-climbing and rock-crawling action in between. We don't want to spoil all the fun, but suffice it to say one competitor was found to be lacking while the other two performed (mostly) well. See for yourself in the video above.

SEMA crowns Mustang, FR-S as this year's hottest cars in the building

After wrapping up the first day of the 2012 SEMA Show, organizers handed out awards for some of the trendiest vehicles on display. Since the whole point of SEMA is to show off new products available in the aftermarket world for use in cars, trucks and SUVs, each year, the show distinguishes the most popular vehicle in various segments. Not surprisingly, this year's Hottest Car and Hottest Sport Compact are the Ford Mustang and Scion FR-S, respectively, while the Ford F-Series brought home the Hottest Truck and the Jeep Wrangler was named the Hottest 4x4-SUV.
More than 2,000 companies are at this year's show, and the display booths represents a "vote" for each car to determing the trendiest vehicles in each of the four categories. It isn't clear if these awards also take cars brought by OEMs into account, but the Mustang and FR-S were definitely well represented by both OEM and aftermarket show versions.
As usual, the OEMs showed up in force at the this year's SEMA Show exhibiting a variety of cars ranging from production-intent cars like the beastly Ford Mustang Cobra Jet to much flashier rides like Scion's Carbon Stealth FR-S.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.