2009 Jeep Wrangler Unlimited X 4dr 3.8l V6 Automatic Run's And Drive Great on 2040-cars

Auto blog

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

Jeep Renegade gets new duds courtesy of Mopar

In a uncommon move, Jeep has found itself with customized versions of a car we've become quite familiar seeing on auto show floors well before it's actual on-sale date. But that's okay – we're pretty fond of the little Renegade, and we're even more keen to get behind the wheel, something that's scheduled to take place in just a few weeks. The two Renegade models you see here have been blessed with bits and pieces from the Mopar parts catalog. These Jeep Performance Parts and Authentic Accessories will be made available to buyers of the Renegade who want to add some factory-backed custom flair to their rough-and-tumble baby crossovers, whether they plan to stay on the asphalt or head off the beaten path. Starting on the street, the Urban Jeep Renegade doesn't really have any major modifications, its factory-spec bike carrier, mirror caps, grille rings, taillamp surrounds and roof rails in Omaha Orange paint over an Anvil-color base serving more to make it stand out from the crowd than actually offer any additional capability. The interior of the Urban Renegade also gets Omaha Orange highlights to go along with Katzkin leather seats. On the dirtier side of the crossover equation, the Commando Green off-road Mopar-modded Renegade gets concept skid plate, prototype rock rails, rear valance and production roof rails provide some added protection and carrying capabilities. X-shaped graphics mimic the jerry can-style motif of the Renegade's tail lamps. Inside, Commando Green bits again join Katzkin leather. Take a good look at all the images above, and feel free to read more about the Mopar-spec Jeep Renegade models below. Mopar to Showcase Trio of Customized Vehicles at NAIAS 2015 - Mopar display at 2015 North American International Auto Show (NAIAS) in Detroit to spotlight how Mopar parts help customers personalize their rides - Off-road Mopar-equipped Jeep® Renegade makes Trailhawk model of Jeep brand's all-new small SUV even more trail tough using Jeep Performance Parts - Urban Mopar-equipped Jeep Renegade enhances city-sized proportions and versatility of the all-new 2015 Renegade with selections from Jeep Authentic Accessories catalog - Dodge Challenger T/A Concept blends vintage design cues with cutting-edge Mopar performance mods January 9, 2015 , Auburn Hills, Mich.

Jeep's 75th Anniversary Wrangler Salute rolls down the line

UPDATE: The commemorative 75th Anniversary Jeep Wrangler rolled down the assembly line in Toledo, Ohio today. With its roll bar, doors, and rear seat removed, it really does pay fitting tribute to the classic Willy military models of the past. The 419 area code stenciled on the bumper and date on the hood look period appropriate. Well done, Jeep. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's difficult to pinpoint exactly when the Jeep Wrangler was born, but the automaker claims the legendary off-roader as we know it today was officially created in 1941. On July 15th of that year, the US Government awarded Willys-Overland with a contract to build the Willys MB, which quickly got the nickname "jeep". To commemorate its 75th anniversary, Jeep has created a WWII-themed Wrangler that pays homage to the Willys MB. The gorgeous concept most likely won't see the road, which is a shame as the rugged one-off yanks at the heartstrings of truck enthusiasts and historians alike. Based on of the current Wrangler Sport, the olive-drab Wrangler 75th Salute concept imitates the original Willys MB to the tee. The concept has no B-pillars, no doors, no roll bars and honors the "function over form" styling of the original military vehicle. The concept rides on 16-inch steel wheels that are wrapped in 32-inch non-directional tires and features vintage-looking hood latches, steel front and rear bumpers with tow hooks, and low back canvas seats. The Salute concept will be built on the same assembly line in Toledo, OH that has produced the Wrangler for decades. In addition to putting out an image of the concept, Jeep also touched on the rich history of the original Willys MB, which you can read below. Related Video: In July 1940, the U.S. military informed automakers that it was looking for a "light reconnaissance vehicle" to replace the Army's motorcycle and modified Ford Model-T vehicles. The Army invited 135 manufacturers to bid on production and developed a lengthy specification list for the vehicle, including a 600-lb. load capacity, wheelbase less than 75 inches, height less than 36 inches, smooth-running engine from 3 to 50 miles per hour, rectangular-shaped body, four-wheel drive with a two-speed transfer case, fold-down windshield, three bucket seats, blackout and driving lights and a gross vehicle weight below 1,300 lbs.