2023 Jeep Gladiator High Altitude on 2040-cars

Auto blog

Jeep Liberty under investigation for door fires

The Jeep Liberty has already had plenty of attention for possible fires thanks to the first-gen model's fuel tank, but now the midsize Jeep is under the microscope of the National Highway Traffic Safety Administration for another fire-related concern. NHTSA has opened an investigation for the 2012 Liberty after receiving two reports of electrical fires in the driver's door.
According to the investigation summary, around 80,000 vehicles could potentially be affected by this problem. In both reported fires, the drivers noticed smoke and then flames from the master power window switch, and they had to pull to a stop and exit through the passenger side of the SUV. According to Autoguide, there was one injury to a motorist who suffered burned fingers while trying to open the driver's door.
Interestingly, the Dodge Nitro is not yet involved in this investigation, even though it was still around for the 2012 model year; the Nitro ended production in 2011 about a year before the final Liberty rolled off the line for the 2013 model year. Scroll down for the official NHTSA investigation summary.

Chrysler recalling nearly half a million Durangos and Grand Cherokees

Rule number one of public relations – save the bad news for Friday. Fiat Chrysler has adhered to that, announcing today that it'd be voluntarily recalling 467,480 SUVs. This latest recall could actually be thought of as a continuation of a September 2014 recall, relating to the fuel-cell relay. In that case, some 188,723 Dodge Durango and Jeep Grand Cherokee CUVs from model year 2011 were recalled. And this time, it's the Durango and GC in trouble again. FCA is adding crossovers from model years 2012 and 2013 to the fuel-pump recall, although only diesel-powered Jeeps with the 3.0-liter V6 that were sold outside of North America are affected this time around. As with the previous recall, deformities in the fuel-pump relay, which could affect its functioning. In most cases, FCA reports that the affected vehicles simply won't start, although they also could be prone to stalling. A new relay circuit will be installed that promises increase durability. Of the 467,480 vehicles being recalled, 338,216 were sold in the US market, 18,991 went to Canada and 10,829 were shipped south of the border, to Mexico. Outside of the NAFTA region, FCA is recalling 99,444 vehicles. No injuries or accidents have been associated with this recall. Statement: Fuel-Pump Relay February 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 467,480 SUVs worldwide to install new a relay circuit that improves fuel-pump relay durability. FCA US engineers have determined a condition identified in a previous investigation may extend to additional vehicles. The previous investigation, which led to a recall, traced a pattern of repairs to fuel-pump relays that are susceptible to deformation. This may affect fuel-pump function, preventing a vehicle from starting, or leading to engine stall. Of the two scenarios, the no-start condition is the more common. FCA US is unaware of any related injuries or accidents. The fuel-pump relay is located inside the Totally Integrated Power Module (TIPM), which also helps manage other vehicle functions. None of these other functions, including air-bag deployment, is affected by the fuel-pump relay. The new campaign affects an estimated 338,216 vehicles in the U.S.; 18,991 in Canada; 10,829 in Mexico and 99,444 outside the NAFTA region. Covered are model-year 2012 and 2013 Dodge Durango full-size SUVs and non-NAFTA 2011 Jeep Grand Cherokee mid-size SUVs equipped with 3.0-liter diesel engines.

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking