1954 Jaguar Xk 120 Roadster on 2040-cars

Auto blog

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.

2016 Jaguar XF mule spied in Germany

From our best guess, the Jaguar test mule shown in these spy shots could very well be our first glimpse at the next-generation Jaguar XF, due out around the 2016 model year. The current XF has been around for five years already (launched in 2008), and this mule is likely testing powertrain or chassis components for a new version of the midsize Jaguar sedan.
With what seems to be a stretched wheelbase and wider track, this is almost certainly not a mule for the 3 Series-fighting Jaguar XS. That being said, though, there is also the outside chance that this could be a mule for other future Jaguar Land Rover products including a production version of the Jaguar C-X17 crossover or the Jaguar-based Range Rover Grand Evoque. Only time will tell what these images truly foretell, but if nothing else, it proves that Jaguar is definitely staying busy these days.

Land Rover will downsize with a pair of hybridized turbodiesel sixes

Europe's automotive industry has ground to a halt, but the strict emissions regulations that went into effect in early 2020 are still looming on the horizon. Land Rover is preparing to launch a pair of hybridized turbodiesel six-cylinder engines in a bid to comply with the regulations and avoid paying huge fines, according to a recent report. British magazine Autocar learned Land Rover has applied the mild hybrid technology already offered on the Evoque and the Discovery Sport, its two smallest models, to a 3.0-liter straight-six to obtain 300 horsepower. The company will also release a more powerful version of the six rated at about 350 horses. The former will be available on HSE, HSE Dynamic and Autobiography Dynamic variants of the Range Rover Sport, while the latter will be added to upmarket models like the HST. The full-size Range Rover (pictured) will get them, too. The sixes represent a two-pronged approach to replacing the 4.4-liter turbodiesel V8 available in Europe, among other markets. It delivers 335 horsepower and 546 pound-feet of torque, and it sends the Range Rover from zero to 60 mph in 6.5 seconds while giving it a 7,700-pound towing capacity. These figures are hard to argue against, but it's an older engine that's increasing the company's fleet-wide average emissions output, so it has to go. The mild hybrid system won't power either Range Rover on electricity alone, but it will make them cleaner and more efficient; losing a pair of cylinders will help in both areas, too. Although Land Rover hasn't confirmed plans to ax the V8 or launch a hybridized six, suppliers have started publishing information about the powertrain, so its launch is believed to be around the corner. Time will tell whether it will appear on the current-generation models or their replacements, which are undergoing shakedown testing globally and due out in the coming months. Sister company Jaguar will use the mild hybrid technology, too. The six-cylinder will find its way into the XF and the F-Pace, which are both expected to receive comprehensive updates before the end of 2020. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Talking Land Rover Defender, Ford Bronco and GMC Jimmy | Autoblog Podcast #586