2011xkr Poltrona Frau Limited Edition, One Of Eighteen on 2040-cars

Auto blog

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.

Jaguar testing hardcore F-Type R-S GT?

Some automakers make a hardcore model, then sit back and revel in its awesomeness. Jaguar does things a little differently. It takes a standard production model, gives it more power, bigger brakes and a tighter suspension and slaps the letter R on it. Then it gives it even more power, even bigger brakes and an even tighter suspension and calls it an R-S. Sometimes the engineers in Coventry don't even think that's enough, so they strip out some weight and dial things up even further and call it an R-S GT.
So far, they've only gone that far with the XK (transformed first into the XKR, then the XKR-S, and finally the XKR-S GT), but with that model on its way out, Jaguar seems to be preparing to give the newer F-Type a similar treatment. Now we can't be sure that what we're looking at is an F-Type R-S GT, especially since the 550-horsepower engine from the XKR-S and XFR-S is already powering the existing F-Type R Coupe, but it does seem to have all the makings of a hardcore performance model.
Compared to the existing F-Type, the development model pictured here has a bigger front splitter (like the one on the Project 7 concept), a big rear wing and a set of what looks like pretty big lightweight alloys. It's also, tellingly, a roadster, which (unlike the coupe) has until now topped out at 500hp with the V8 S model. So while it may be hard to say exactly just what Jaguar has in store for us here (or what they'll call it), one thing's for sure: it's gonna be fast and loud.