*********1988 Jagua Xj6***********low Miles****************** on 2040-cars

Auto blog

Jaguar will build 9 XKSS continuation cars at $1.4m each

The Jaguar D-Type was, for its time, a cutting-edge race car. It was also a car that could, theoretically, drive from Jaguar's Browns Lane factory to the race in France and back. This was an era in which top-tier race cars weren't all that different from their road-going counterparts. You couldn't really do the same in an Audi R18 E-Tron Quattro, now could you? The XKSS was a D-Type with the barest nod to road-going conveniences, like proper wind protection. With some unsold D-Type racers cluttering up the shop after three successive Le Mans wins, Jaguar converted 16 into XKSS spec, and had more in the works. It wasn't a comprehensive transformation, really. A windshield and a passenger door were added; a cabin partition and the striking fin behind the driver were removed. Otherwise, it wasn't much different than the all-conquering Le Mans-winners. And then tragedy struck. A fire destroyed nine of the cars, and the company never picked up where it left off after the mess was cleaned up. Hence Jaguar aficionados, and the company itself, keenly felt the absence of the "lost" cars. After the success of the continuation E-Type lightweights built by the Jaguar Classic division of Special Operations, the company will finish the run. Nine cars will be hand-crafted for a select group of customers and collectors, much as the company did for the lightweights. Jaguar expects the cars to fetch more than $1.5 million each. Considering the mystique of these "lost" cars, and the fact that Steve McQueen is heavily associated with the XKSS, they may trade hands for considerably more after the initial owners part with them. Jaguar expects to start delivering the continuation XKSS cars early next year. Related Video: New York Auto Show Jaguar Convertible Performance Classics jaguar special operations jaguar xkss

Land Rover will put a Covid-nuking air filtration system in future cars

Jaguar - Land Rover (JLR) is developing an air filtration system that inhibits up to 97% of viruses and airborne bacteria. Designed like a face mask for your car's HVAC system, it's built on Panasonic's Nanoe X technology. Most of the company's models (including the Land Rover Defender) currently come equipped with Panasonic's Nanoe technology and PM2.5 filtration. Nanoe X is 10 times more effective, according to the brand, because it relies on a high voltage to create trillions of hydroxyl (OH) radicals enveloped in nano-sized water molecules. Think of them as Roman guards in front of a fortress: they keep the bad out, and ensure only the good can come in. Viruses and bacteria proteins are denatured when they come into contact with the filtration system, meaning they can't reproduce or grow. The OH radicals also zap common allergens and mold, but they're harmless to humans. JLR stressed it's not relying on computer simulations to decide whether its filtration system works as designed. It asked British laboratory Perfectus Biomed to perform a test that simulates a ventilation system in recirculation mode for a 30-minute cycle in a sealed chamber. The results were encouraging: 97% of viruses and airborne bacteria were nuked. The carmaker pointed out Panasonic's Nanoe X technology has been independently proven to inhibit 99.995% of coronaviruses during a two-hour laboratory test carried out by French immunology lab Texcell. Future models from Jaguar and Land Rover will use this technology, though a representative for both companies declined to tell us when it will reach production, and which nameplate(s) will inaugurate it. Meanwhile, Honda launched its own coronavirus killer across the pond. It's a cabin air filter sold as a genuine replacement part that consists of four layers, including one coated with an active substance of fruit extract that inactivates nearly 100% of the viral aerosols it captures. It's available in Europe through Honda dealers, but it won't be sold in America. Jaguar Land Rover

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.