* 2009 Jaguar Xf 4 Dr Luxury Sedan (fully Loaded) 32k Jet Black Beauty!* on 2040-cars

Auto blog

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.

Jaguar to go racing with F-Type GT3?

Most British automakers have some manner of racing program. Aston Martin, Lotus and McLaren race as a matter of course. Bentley recently got back into racing, Morgan has dabbled here and there, even Land Rover has its off-road racing programs. The only one, it seems, that isn't racing these days is Jaguar... but that could be about to change. The latest intel from the UK suggests that Jaguar is closely evaluating the prospect of building a GT3-spec racer based on the F-Type. Like the Bentley Continental GT3 co-developed with M-Sport (not to mention Coventry's own successful partnership with TWR), the Jaguar program would need an established racing outfit to help develop the car and field it, and the automaker is said to be evaluating three potential partners. The development of the GT3 racer would allow Jaguar to compete (or sell cars for others to compete) in a variety of racing series around the world, including the Blancpain Endurance Series, the European Le Mans Series and, if properly adapted, other series like the United SportsCar Championship and the 24 Hours of Le Mans. Jaguar's car would have to compete with such rivals as the Aston Martin Vantage GTE, Audi R8 LMS, Ferrari 458 GT, Mercedes-Benz SLS AMG GT3 and Porsche 911 GT3 R. Current FIA GT3 regulations use a Balance of Performance equation that allows for a curb weight between 1,200 and 1,300 kilograms (2,645 to 2,866 pounds) and produce between 500 and 600 horsepower. A more cost-effective GT4 racer could follow. But the best part is that Jaguar could, according to the report in Autocar, develop a road-going version as well, even more focused than the Project 7 pictured above and similar to what Bentley did with the Continental GT3-R. Jaguar of course has had a rich history with motor racing, reaching back to its dominance at Le Mans in the 1950s with the C-Type and D-Type, extending through the TWR partnership in touring car and endurance racing in the 1980s and 90s, to the short-lived Formula One team that became Red Bull Racing. It launched a GT2-spec XKR a few years ago and was tipped to be developing a new LMP1 prototype, but neither are on the track today, where Jaguars only compete in vintage racing. Featured Gallery Jaguar F-Type Project 7 View 29 Photos News Source: Autocar Motorsports Jaguar Racing Vehicles gt3

The Jaguar E-Type Lightweight is back on the prowl after a few decades away

Sometimes procrastination has its benefits. Jaguar originally planned to build a run of 18 E-Type Lightweights for racing in the '60s. However, it was only ever to complete 12 of them. It has taken all of the intervening decades to finally get back to the project and build the final run of new Lightweights. While Jag announced the plan recently, the first continuation model was unveiled during the Pebble Beach weekend.
Coming from Jaguar Land Rover's Special Operations unit, these cars are identical to the way they left the factory in the '60s. Jag is even using the same grade of aluminum for the bodies, and the cars are fully compliant for FIA historic racing. Power comes from an aluminum, 3.8-liter inline-six with about 300 horsepower and 280 pound-feet of torque routed through a four-speed manual gearbox. Who could guess that in 2014 someone could buy a brand new vehicle from a major manufacturer that comes with Weber carbs? Though, Lucas mechanical fuel injection is an option.
While they look old, these new E-types are also a wonder of modern technology. To get things just right, the company laser scanned an original car to create the new bodies. Check out the gallery from the unveiling to see this old cat on the prowl again.