1997 Infiniti Qx4 Base Sport Utility 4-door 3.3l on 2040-cars

Auto blog

Production Infiniti QX50 will mostly look like the concept

At this year's Detroit auto show, we got a look at the nearly production-ready Infiniti QX50 concept. Now we get our first look at how close to production the concept was, thanks to new spy photos. The overall shape remains very similar to that of the curvy concept. However, the greenhouse looks taller with more glass. While it isn't quite as low and aggressive-looking, we're sure drivers will appreciate the small compromise for better visibility. At the front, there are more changes that are a little less subtle. The grille looks a bit smaller all around, and even looks a tad lower than the concept. The headlights also don't stretch as far back, and they aren't as narrow either. In the front bumper, the two side scoops of the concept have been significantly toned down, and now look like more traditional grilles that follow the shape of the bumper. The lower grille is more open with just a mesh insert instead of the concept's skidplate-style chrome bar. Moving to the back, we find the taillights look nearly identical to the concept's. They're very long and narrow, and they connect into a metal crease that looks a bit like a spoiler. It looks as the though the faux skidplate treatment on the rear bumper will also make it to production, but the integrated exhaust tips have given way to more conventional round tips in bumper cutouts. It also may have lost the concept's air vents on each side of the hatch. Though they may have also just been toned down enough that they don't show through the camouflage. When the QX50 hits dealers, it will be available with Infiniti's fascinating variable compression four-cylinder making 268 horsepower. The crossover will also feature a version of Nissan's ProPilot semi-autonomous technology, which has been implemented in the Nissan Serena minivan in Japan. We expect to see the fully revealed production model very soon, possibly by the end of the year. Related Video:

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

Infiniti takes to Facebook to explain model names, mentions 550-hp flagship

Infiniti caused quite a stir this week when it announced that it would be changing its vehicle names so that all of its cars start with Q and all of its crossovers and SUVs start with QX. Many displeased fans and owners took to social media to voice their opinions, and Johan de Nysschen, the new Infiniti boss, responded today with a Facebook post of his own.
In the note, de Nysschen talks about the challenge of product expansions with alphanumeric names that allow for flexibility without encroaching on the trademarked names of other automakers, although we're sure de Nysschen's former colleagues at Audi aren't looking forward to a Q30 or Q50. He also says that as Infiniti grows to become a global brand, the new naming structure - which closely mimics Volvo - is also designed to reduce confusion (just don't tell that to current owners). One thing that de Nysschen assured wouldn't happen is a confusing "X" added to the end of all-wheel-drive model names that would result in names like the Q60X or, even worse, the QX50X.
While we are not looking forward to relearning Infiniti's product lineup, de Nysschen has given us something to look forward to courtesy of a new performance sedan. From the brief explanation of this car, which was used as a key example in explaining the validity of the new names, we learned that the new model will be a performance version of what is now the M sedan, and it will be powered by a "charged induction" 3.0-liter V6 producing more than 550 horsepower. The M's name will become the Q70, but as of right now, it isn't clear if this will be an IPL model or something else.