4dr Sdn X Awd Sedan Automatic Gasoline 3.5l Dohc 24-valve Aluminum-alloy V6 Engi on 2040-cars

Auto blog

Infiniti QX55 crossover coupe teased again, hints at FX looks and a surprise out back

Infiniti plans to launch five new vehicles in the next three years. We got an abstract squiggle of the first one in August, when Infitini teased the coming QX55 crossover coupe during Monterey Car Week. Said to act as a medium that would communicate design language from the dearly departed FX crossover, the QX55 is meant to infuse a lot more design mojo to the conventional QX50 crossover that it's based on. The Japanese luxury brand just dropped the second teaser, this one revealing a swath of greenhouse and shoulder, and indeed, an arc of chrome trim that could have been traced from FX production drawings. The attention-getter here is what comes behind the greenhouse: A tailgate extension with the makings of a stubby trunk.  Positive reviews have come from a group of media to whom Infiniti showed a matte gray pre-production version of the QX55. The front diverges from the QX50 only in a few details, while the roofline isn't as coupe-ish as it might be because designers wanted to ensure adequate headroom for rear seat passengers. The steep rake has been saved for the area aft of the C-pillar, convincing one scribe to write that "the QX55 reminds us most of the Audi Q8, which also lacks swooping silhouette and looks more like a lifted hatchback." The rear fascia is said to look "cleaner and more modern than Infiniti’s current midsize crossovers," even though the jutting rear presents a vertically flat lower hatch that looks "a bit boxy." Having moved the license plate holder to the bumper, the wide expanse is home to a larger Infiniti badge and logo script with an "I" that serves an as-yet-undisclosed function. At the edges come taillights with a "sharp new piano key design." One site summed up with, "this is a gorgeous crossover coupe that will turn heads." The QX50 is expected to debut in the first three months of 2020, with an on-sale date sometime next summer.

Infiniti Q60 Project Black S packs F1-derived hybrid twin-turbo V6

At the 2017 Geneva Motor Show, Infiniti unveiled the Project Black S, a souped-up version of the Q60 coupe that packed technology derived from the Renault Sport Formula 1 Team's race cars. Details were scarce. Aside from some F1-inspired bodywork, all we knew was that the twin-turbo V6 would be paired with a kinetic energy recovery system, or KERS for short. At next week's Paris Motor Show, Infiniti is bringing a new concept that's a bit more polished as well as some additional details about what rests under the hood. The car is still dubbed the Infiniti Project Black S. The car still packs a twin-turbocharged 3.0-liter V6 paired with an energy recovery system. Infiniti claims the car makes 563 horsepower, up from 400 in the Q60 Red Sport 400. The Project Black S should hit 60 mph in fewer than four seconds. The powertrain uses three motor generator units (MGU) and a single MGU-K that harvests brake energy. Two electric turbochargers harvest heat energy from the exhaust, meaning the car can gain energy both under braking and acceleration. Visually, there's not much that's changed from last year's Geneva concept. We only have one new photo, but to our eyes the only difference is a few yellow accents on the front bumper. We'll have to wait until next week's reveal for more photos. Related Video:

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.