Infiniti G35x 2007 Fresh Trade In Super Nice Car Low Reserve Price Set A+ on 2040-cars

Auto blog

Infiniti's variable compression engine in the 2019 QX50 is the first of its kind

The world's first variable compression ratio engine is here, in a production car. That car is the 2019 Infiniti QX50, debuting this week at the Los Angeles Auto Show. The midsize crossover has seen a refresh that has brought it an all-new platform together with new driver assist features, but it's the engine that's the centerpiece here. Nearly everything is continuously variable under the hood of the QX50 – not only the new shift-by-wire XTRONIC CVT. The new VC-Turbo gasoline engine is able to change its compression ratio from 8:1 to 14:1, or anything in between depending of the driving situation; whether there is need for top-end power or turbodiesel-like torque from low revs, or optimized fuel economy. The pistons' reach is continuously adjusted by an electric "Harmonic Drive" motor, which controls a multi-link system, affecting the top-dead-center of the pistons and changing the compression. The engine can also switch between efficiency-maximizing Atkinson cycle and regular combustion cycle, on the go – and there's both multipoint injection and gasoline direct injection employed. The result is 268 horsepower at 5,600 rpm and 280 pound-feet of torque at 4,400 rpm; good figures for a 2.0-liter four-cylinder gasoline engine with a single-scroll turbocharger. Infiniti says that the FWD version's fuel economy of 27 miles per gallon combined is 35-percent better than the previous-generation V6 engine; in AWD guise, it reaches 26 mpg, which is a 30-percent improvement. The new engine is pretty much all-aluminum, but the vaguely magical-sounding "transformative multi-link components" behind the variable compression system are made from high-carbon steel alloy. The engine's multi-link system also enables it to do away with any balancing shafts, and Infiniti compares its smoothness to a V6 rather than a regular four-cylinder. In addition to the aforementioned tech, the VC-Turbo engine has the world's first active engine mount vibration damping system to smoothen its operation even further. Related Video:

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.

Nissan recalls 640k crossovers for wiring issue, hood release

The National Highway Traffic Safety Administration has announced two separate recalls affecting hundreds of thousands of Nissan crossovers. The larger of the two involves the electrical system in 2008-2013 model year Rogue CUVs. In affected vehicles, a mixture of moisture and salt seeping in through the carpet on the driver's side could cause the harness connector to short, potentially causing a fire. The issue involves Nissan Rogues manufactured between March 7, 2007, and November 26, 2013, as well as examples of the 2014 Rogue Select manufactured between September 23, 2013, and July 2, 2014. All told, that comes to an estimated 468,815 units in the United States alone. The second recall affects the relatively smaller quantity of 170,665 vehicles, made up of 2013-14 Nissan Pathfinder, 2014 Pathfinder Hybrid, 2013 Infiniti JX35, 2014 QX60 and 2014 QX60 Hybrid models. (The JX35 was recently relabeled as the QX60 under Infiniti's new nomenclature.) The issue affecting some of those vehicles revolves around a hood release cable that may not properly latch. Nissan is notifying owners of the affected units to bring their vehicles in to have the wiring checked and to replace the harness connector and seal in the former case, and to have the hood release mechanism modified in the latter. All told, an estimated 639,480 vehicles are being recalled as part of the two campaigns. RECALL Subject : Electrical Short Due to Water Seepage Report Receipt Date: JAN 26, 2015 NHTSA Campaign Number: 15V032000 Component(s): ELECTRICAL SYSTEM Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008-2013 Nissan Rogue vehicles manufactured March 7, 2007, to November 26, 2013, and 2014 Nissan Rogue Select vehicles manufactured September 23, 2013, to July 2, 2014. The affected vehicles may experience an electrical short in the harness connector due to a mixture of snow/water and salt seeping through the carpet on the driver side floor near the harness connector. CONSEQUENCE: An electrical short can cause a vehicle fire. REMEDY: Nissan will notify owners, and dealers will inspect the kick panel wiring harness connector and will if necessary install a new harness connector and waterproof seal, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Nissan customer service at 1-800-647-7261.