7-days *no Reserve* '08 G37 Sport 6-speed Premium Bose Ext 2year/30k Mi Warranty on 2040-cars

Auto blog

Infiniti shows off the new Q50 engine lineup in Chicago

Infiniti has a raft of engine options it's rolling out on the Q50 sedan. We found out about most of them a couple of months ago, but they're now confirmed in all their turbocharged glory. And they'll all be showcased this week at the Chicago Auto Show. The base engine is a 2.0-liter turbo four based on a Mercedes design and built at the new joint-venture engine plant in Tennessee. The engine produces 208 horsepower and 258 pound-feet of torque and will be available in the Q50 2.0t in either rear- or all-wheel drive. If those specs strike you as familiar, they're the same that you'd find in the Mercedes CLA250 and GLA250, both of which similarly make their 4Matic traction optional, but come standard in front- (not rear-) drive form. Above the four-pot sits a new 3.0-liter twin-turbo V6 that replaces the naturally aspirated 3.7-liter unit and will be available in two states of tune. The 3.0t model offers 300 hp and 295 lb-ft, but the performance model – dubbed Q50 Red Sport 400 – cranks it up to 400 hp and 350 lb-ft. Both versions come mated to a seven-speed automatic transmission and either rear- or all-wheel drive. The fourth powertrain options carries over in the form of the Q50 Hybrid, which still pairs a naturally aspirated 3.5-liter V6 to a 50-kW electric motor for a combined output of 360 hp. So if you like your sports sedan to come with some manner of assist, the Q50 offers plenty of choices. But if you're in the atmospheric camp, we're afraid you'll have to look elsewhere. Related Video: Infiniti Presents Three New Q50 Sports Sedan Engines for the First Time at the 2016 Chicago Auto Show - Q50 Red Sport 400 offers new 400-horsepower VR-series 3.0-liter V6 twin turbo engine - Advanced 300-horsepower VR V6 twin-turbo version shown for the first time in Chicago - Pair of new V6 twin turbo engines joined by new 2.0-liter turbo inline-4 rated at 208 horsepower CHICAGO (Feb. 11, 2016) – Infiniti today revealed the full lineup of new advanced engines for its Infiniti Q50 sports sedan at the 2016 Chicago Auto, including two 3.0-liter V6 twin turbo engines and a 2.0-liter 4-cylinder turbo engine. The trifecta of new powerplants will be available beginning this spring. Joining the three new engine-equipped Q50 models – designated the Q50 2.0t, Q50 3.0t and Q50 Red Sport 400 – on display at the country's oldest and best-attended auto show are the redesigned 2016 QX60 crossover and the all-new QX30 premium active crossover.

US-built Infiniti Q50 engines to go into Euro-only cars

Back in March, Infiniti announced that it would be adding a 2.0-liter, turbocharged four-cylinder to its Q50 line for European and Chinese buyers. Now, we know where that engine will be built.
Nissan's Decherd, TN facility will receive the $319-million investment, which will see a separate, dedicated line for the Infiniti engines. According to Automotive News, this is more than a line running alongside the Nissan operations - the Infiniti facility will sport its own unique architecture and interior lighting, in a bid to distinguish the premium line from its mass-market parent company.
The logistics of all this do seem, on the surface, quite screwy. Building a new engine on one continent for a car built on another that will eventually go on sale on a third doesn't seem too bright, although there is a catch here. The new engine will also find its way into the Mercedes-Benz C-Class, which will kick off production in Vance, AL later this year.

Nissan recalling GT-R, Infiniti crossovers over steering column issue

Nissan has discovered a problem with the steering column on some of its higher-end all-wheel-drive vehicles from a few years back, and has issued a recall in conjunction with the National Highway Traffic Safety Administration to address the issue. The issue revolves around the outer tube on the steering column, which may not be perfectly round. That would put extra stress on the upper steering bearing, which could cause it to fracture, disabling the car's steering ability and potentially leading to a crash. The problem affects Nissan's flagship GT-R supercar – specifically 2009 models manufactured between March 14, 2007, and April 25, 2008) as well as an array of Infiniti crossovers: namely the 2008 EX35 and the 2008-09 FX35 and FX45. In the case of the luxury crossovers, Infiniti dealers are being instructed to replace just the steering shaft, but Nissan dealers will have to replace the entire steering column assembly on the GT-R. All told, the recall is estimated to encompass 16,973 vehicles across the United States. RECALL Subject : Steering Column Tube may be Out of Round Report Receipt Date: FEB 02, 2015 NHTSA Campaign Number: 15V054000 Component(s): STEERING Potential Number of Units Affected: 16,973 Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering. CONSEQUENCE: Extra play in the steering wheel or a loss of steering may increase the risk of a crash. REMEDY: Nissan will notify owners, and dealers will replace the steering shaft on the Infiniti EX35, FX35, and FX45 vehicles, and will replace the steering column assembly on the Nissan GT-R vehicles, free of charge. The manufacturer has not yet provided a notification schedule. Infiniti owners may contact customer service at 1-800-662-6200. Nissan owners may contact the GT-R hotline at 1-866-668-1487.