2012 G37s Sport,coupe,navigation,camera,automatic,1.49% Financing on 2040-cars

Auto blog

Infiniti QX50 confirmed for NY debut

It's been eight years now since Infiniti took the wraps off its smaller crossover. The model initially known as the EX was subsequently renamed the QX50 in the brand's broad nomenclature shakeup a couple of years ago, but now it's received what promises to be a comprehensive makeover to be revealed at the New York Auto Show next week. Though it hasn't given us any photos to go on (that's the current model pictured above), Infiniti has revealed that "the updated QX50 has a wheelbase increase of more than three inches, creating additional rear legroom and interior volume." We're also told to expect "new front and rear fascias, wheels, side sills, as well as a slightly higher ride stance." Nissan's rival to the likes of the BMW X3, Audi Q5, Volvo XC60 et al is offered Stateside with a 3.7-liter V6 driving the rear wheels or all four, but is offered overseas as well with a 3.0-liter turbodiesel. We'd expect the revised model to carry over the same engines, perhaps with some revisions, when it reaches showrooms this fall.

Production Infiniti QX50 will mostly look like the concept

At this year's Detroit auto show, we got a look at the nearly production-ready Infiniti QX50 concept. Now we get our first look at how close to production the concept was, thanks to new spy photos. The overall shape remains very similar to that of the curvy concept. However, the greenhouse looks taller with more glass. While it isn't quite as low and aggressive-looking, we're sure drivers will appreciate the small compromise for better visibility. At the front, there are more changes that are a little less subtle. The grille looks a bit smaller all around, and even looks a tad lower than the concept. The headlights also don't stretch as far back, and they aren't as narrow either. In the front bumper, the two side scoops of the concept have been significantly toned down, and now look like more traditional grilles that follow the shape of the bumper. The lower grille is more open with just a mesh insert instead of the concept's skidplate-style chrome bar. Moving to the back, we find the taillights look nearly identical to the concept's. They're very long and narrow, and they connect into a metal crease that looks a bit like a spoiler. It looks as the though the faux skidplate treatment on the rear bumper will also make it to production, but the integrated exhaust tips have given way to more conventional round tips in bumper cutouts. It also may have lost the concept's air vents on each side of the hatch. Though they may have also just been toned down enough that they don't show through the camouflage. When the QX50 hits dealers, it will be available with Infiniti's fascinating variable compression four-cylinder making 268 horsepower. The crossover will also feature a version of Nissan's ProPilot semi-autonomous technology, which has been implemented in the Nissan Serena minivan in Japan. We expect to see the fully revealed production model very soon, possibly by the end of the year. Related Video:

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.