2009 Infiniti G37 Journey Sedan 4-door 3.7l on 2040-cars

Auto blog

Grand Prix of the Americas, Day 1 Recap: a city arose in the fields, and it was good

The Circuit of the Americas is the miracle in the fields, the track that no one thought would be finished in time to hold its appointed race. But the Texans got past the turmoil, and even though the heavy machinery was still working on dirt roads as July, come November 18 there was a beautiful, and completed, Formula 1 facility for Travis County to call its own. It was dusty, sure. But it was done, and F1 could come to town.
Infiniti, sponsors of Red Bull Racing, invited Autoblog to watch the first grand prix in America since 2007, and the first GP on a dedicated F1 course since the Phoenix street circuit in 1991. Here's a little recap of what we saw and fount out on day one.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Infiniti Q50 steer-by-wire system took 10 years to develop [w/video]

Infiniti's Direct Adaptive Steering (DAS) is quite a novelty - the system employs no physical connection between the steering wheel and the front wheels under normal circumstances and instead relies on a computer, clutch and steering-angle actuator to guide vehicles down the road with input from the driver.
In our First Drive review of a 2014 Infiniti Q50 equipped with the system, we weren't overly impressed by the artificial feedback. But we can't help but be impressed with how long Infiniti spent on its development: a full 10 years, according to Autoline Daily in the video report below. A staggering 70 percent of the research and development time spent on DAS was devoted to getting the steering feel right, and unfortunately, our first impression suggests their results still leave something to be desired, as we found it lacked the sporty feeling a sport sedan should have.
The weight of DAS is comparable to that of a conventional steering system due to its complexity. For example, three ECUs are used in the first-generation DAS system to ensure there's never a loss of steering, but Infiniti is refining the technology and is working to simplify it to reduce weight. One day Infiniti hopes that only one ECU will be needed to control DAS. We just hope it doesn't take the Japanese automaker another ten years to get the steering feel right.