2004 Infiniti G35 Base Coupe 2-door 3.5l on 2040-cars

Auto blog

Production Infiniti QX50 will mostly look like the concept

At this year's Detroit auto show, we got a look at the nearly production-ready Infiniti QX50 concept. Now we get our first look at how close to production the concept was, thanks to new spy photos. The overall shape remains very similar to that of the curvy concept. However, the greenhouse looks taller with more glass. While it isn't quite as low and aggressive-looking, we're sure drivers will appreciate the small compromise for better visibility. At the front, there are more changes that are a little less subtle. The grille looks a bit smaller all around, and even looks a tad lower than the concept. The headlights also don't stretch as far back, and they aren't as narrow either. In the front bumper, the two side scoops of the concept have been significantly toned down, and now look like more traditional grilles that follow the shape of the bumper. The lower grille is more open with just a mesh insert instead of the concept's skidplate-style chrome bar. Moving to the back, we find the taillights look nearly identical to the concept's. They're very long and narrow, and they connect into a metal crease that looks a bit like a spoiler. It looks as the though the faux skidplate treatment on the rear bumper will also make it to production, but the integrated exhaust tips have given way to more conventional round tips in bumper cutouts. It also may have lost the concept's air vents on each side of the hatch. Though they may have also just been toned down enough that they don't show through the camouflage. When the QX50 hits dealers, it will be available with Infiniti's fascinating variable compression four-cylinder making 268 horsepower. The crossover will also feature a version of Nissan's ProPilot semi-autonomous technology, which has been implemented in the Nissan Serena minivan in Japan. We expect to see the fully revealed production model very soon, possibly by the end of the year. Related Video:

Nissan recalls 640k crossovers for wiring issue, hood release

The National Highway Traffic Safety Administration has announced two separate recalls affecting hundreds of thousands of Nissan crossovers. The larger of the two involves the electrical system in 2008-2013 model year Rogue CUVs. In affected vehicles, a mixture of moisture and salt seeping in through the carpet on the driver's side could cause the harness connector to short, potentially causing a fire. The issue involves Nissan Rogues manufactured between March 7, 2007, and November 26, 2013, as well as examples of the 2014 Rogue Select manufactured between September 23, 2013, and July 2, 2014. All told, that comes to an estimated 468,815 units in the United States alone. The second recall affects the relatively smaller quantity of 170,665 vehicles, made up of 2013-14 Nissan Pathfinder, 2014 Pathfinder Hybrid, 2013 Infiniti JX35, 2014 QX60 and 2014 QX60 Hybrid models. (The JX35 was recently relabeled as the QX60 under Infiniti's new nomenclature.) The issue affecting some of those vehicles revolves around a hood release cable that may not properly latch. Nissan is notifying owners of the affected units to bring their vehicles in to have the wiring checked and to replace the harness connector and seal in the former case, and to have the hood release mechanism modified in the latter. All told, an estimated 639,480 vehicles are being recalled as part of the two campaigns. RECALL Subject : Electrical Short Due to Water Seepage Report Receipt Date: JAN 26, 2015 NHTSA Campaign Number: 15V032000 Component(s): ELECTRICAL SYSTEM Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008-2013 Nissan Rogue vehicles manufactured March 7, 2007, to November 26, 2013, and 2014 Nissan Rogue Select vehicles manufactured September 23, 2013, to July 2, 2014. The affected vehicles may experience an electrical short in the harness connector due to a mixture of snow/water and salt seeping through the carpet on the driver side floor near the harness connector. CONSEQUENCE: An electrical short can cause a vehicle fire. REMEDY: Nissan will notify owners, and dealers will inspect the kick panel wiring harness connector and will if necessary install a new harness connector and waterproof seal, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Nissan customer service at 1-800-647-7261.

2014 Infiniti QX60 Hybrid

Infiniti launched its seven-passenger JX crossover for the 2013 model year with the automaker's familiar 3.5-liter V6 as standard equipment. For 2014, the model was renamed the QX60, and a new variant packing a gasoline-electric hybrid powertrain joined the lineup. (For those interested in the family lineage, the new arrival is a mechanical twin to the Nissan Pathfinder Hybrid, which we took for a Quick Spin last year).
Hidden beneath the hood of the QX60 Hybrid is a supercharged, 2.5-liter inline four-cylinder engine, rated at 230 horsepower and 243 pound-feet of torque. The combustion engine is supplemented by a 15-kilowatt electric motor, fed by a small lithium-ion battery back (hidden under the rear cargo floor), which adds 20 hp and 29 lb-ft of torque to the mix. Added up, Infiniti rates the total system power at 250 hp and 243 lb-ft - numbers that fall just short of its combustion sibling (the 3.5-liter V6 in the QX60 is rated at 265 horsepower and 248 pound-feet of torque). The only gearbox is a continuously variable transmission that drives either the front or all four wheels, depending on what the buyer specs.
The 2014 QX60 Hybrid AWD starts at $46,500 (the green model commands a $3,000 premium over the gas-only model). A long list of factory options such as Roof Rails ($495), Theater package ($1,700), Deluxe Technology package ($6,050), illuminated kick plates ($440) and a Hybrid Premium package ($4,600) bumped our as-tested price to a healthy $60,780, including $995 for destination.