2011 Infiniti Qx56 4x4 Twin Dvd 22's Captain Call David on 2040-cars

Auto blog

Infiniti Q50 Eau Rouge portends seriously powerful future sports sedan

"If we built this car I would expect it to feature over 500 horsepower and 600 pound-feet of torque."
Eau Rouge is a notoriously difficult turn at Belgium's Spa-Francorchamps Circuit that is capable of striking fear into the hearts of the most hardened driver. Naming a car after something so terrifying, therefore, strikes us as a rather poor idea.

2014 Infiniti QX60 Hybrid

Infiniti launched its seven-passenger JX crossover for the 2013 model year with the automaker's familiar 3.5-liter V6 as standard equipment. For 2014, the model was renamed the QX60, and a new variant packing a gasoline-electric hybrid powertrain joined the lineup. (For those interested in the family lineage, the new arrival is a mechanical twin to the Nissan Pathfinder Hybrid, which we took for a Quick Spin last year).
Hidden beneath the hood of the QX60 Hybrid is a supercharged, 2.5-liter inline four-cylinder engine, rated at 230 horsepower and 243 pound-feet of torque. The combustion engine is supplemented by a 15-kilowatt electric motor, fed by a small lithium-ion battery back (hidden under the rear cargo floor), which adds 20 hp and 29 lb-ft of torque to the mix. Added up, Infiniti rates the total system power at 250 hp and 243 lb-ft - numbers that fall just short of its combustion sibling (the 3.5-liter V6 in the QX60 is rated at 265 horsepower and 248 pound-feet of torque). The only gearbox is a continuously variable transmission that drives either the front or all four wheels, depending on what the buyer specs.
The 2014 QX60 Hybrid AWD starts at $46,500 (the green model commands a $3,000 premium over the gas-only model). A long list of factory options such as Roof Rails ($495), Theater package ($1,700), Deluxe Technology package ($6,050), illuminated kick plates ($440) and a Hybrid Premium package ($4,600) bumped our as-tested price to a healthy $60,780, including $995 for destination.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.