2010 Infiniti Qx56 Low Miles One Owner on 2040-cars

Auto blog

2014 Infiniti Q50's novel drive-by-wire steering system recalled

The gradual replacement of mechanical components in automobiles with electronic systems brings with it definite advantages, but also poses certain potential dangers. Just think of the inevitable problems you've encountered with the computer on which you're reading these words and you'll know what we mean. But a computer crashing isn't as problematic as your car going on the fritz when its electronic systems fail.
That's what Infiniti is being reminded of with its new drive-by-wire electronic steering system. The Japanese automaker developed and installed the Direct Adaptive Steering System in its new Q50 sedan, but a small number of those cars on the road are now being recalled due to that system.
According to the National Highway Traffic Safety Administration, on a small number of examples, the Q50's optional by-wire system may fail if the temperature in the engine compartment drops below freezing. There's a backup mechanical setup in place should the electronic system fail, but NHTSA says that the backup system may also fail to engage in time to avoid a crash.

Infiniti takes to Facebook to explain model names, mentions 550-hp flagship

Infiniti caused quite a stir this week when it announced that it would be changing its vehicle names so that all of its cars start with Q and all of its crossovers and SUVs start with QX. Many displeased fans and owners took to social media to voice their opinions, and Johan de Nysschen, the new Infiniti boss, responded today with a Facebook post of his own.
In the note, de Nysschen talks about the challenge of product expansions with alphanumeric names that allow for flexibility without encroaching on the trademarked names of other automakers, although we're sure de Nysschen's former colleagues at Audi aren't looking forward to a Q30 or Q50. He also says that as Infiniti grows to become a global brand, the new naming structure - which closely mimics Volvo - is also designed to reduce confusion (just don't tell that to current owners). One thing that de Nysschen assured wouldn't happen is a confusing "X" added to the end of all-wheel-drive model names that would result in names like the Q60X or, even worse, the QX50X.
While we are not looking forward to relearning Infiniti's product lineup, de Nysschen has given us something to look forward to courtesy of a new performance sedan. From the brief explanation of this car, which was used as a key example in explaining the validity of the new names, we learned that the new model will be a performance version of what is now the M sedan, and it will be powered by a "charged induction" 3.0-liter V6 producing more than 550 horsepower. The M's name will become the Q70, but as of right now, it isn't clear if this will be an IPL model or something else.

A look inside Infiniti's variable-compression engine

We're sympathetic to anyone who had trouble understanding what's going on with Infiniti's new variable-compression engine. While we got a full tech briefing on the novel VC-Turbo back in August, the visual aids were lacking. The cutaway engine Infiniti brought to the Paris show fixes all of that. You can thank the little green and pink lines on the cutaway for making the whole idea a little more clear. Click through the gallery to see two lines – one green and one pink – that represent the different strokes allowing for different compression ratios. Remember, the compression ratio is the amount of volume in the cylinder on intake compared to the amount at the end of the compression stroke. Leave more room at the end and you lower that ratio. The length of the stroke doesn't change with this system, but where it sits along the cylinder does. Hence those two lines. The variable compression ratio allows this new turbocharged engine to maximize fuel economy when the turbo isn't needed by raising the compression ratio. It will see its first use in the next Infiniti QX50 crossover, previewed by the QX Sport Inspiration concept that's also on display in Paris, and has performance targets of 268 horsepower and 288 pound-feet of torque. After, it will migrate to other Infiniti and Nissan vehicles, with transverse front-drive-based applications first in line. Eventually, it's likely to completely replace Nissan's corporate 3.5-liter V6. We'll be poking around the engine a little more in Paris today to try and get some more info. For now, enjoy those cutaway images and those friendly little lines. Featured Gallery Infiniti VC-Turbo engine cutaway View 14 Photos Paris Motor Show Infiniti Nissan Technology Emerging Technologies engine 2016 paris motor show