Black Leather Seats, All Wheel Drive, Sunroof, Navigation, Rear Back Up Camera on 2040-cars

Auto blog

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Submit your questions for Autoblog Podcast #344 LIVE!

We're set to record Autoblog Podcast #344 tonight, joined by Doug DeMuro, author of Plays With Cars, formerly of Porsche Cars North America, and all-around swell guy. You can drop us your questions and comments via our Q&A module below, and we'll give them extra-diligent attention. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #344
BRZ STI?

Red Bull Racing unveils RB10 as pre-season testing kicks off

Ladies and gentlemen, here's the car that will win the 2014 Formula One World Championship... probably. Maybe. The success of Red Bull Racing over the past several years means that the debut of its 2014 challenger is one of the more note-worthy events of the preseason, showing off the latest piece of aerodynamic mastery from Adrian Newey.
Like the Ferrari F14 T, the Red Bull RB10 features a more conventional nose, which still plunges rather dramatically ahead of the front wheels. We're seeing a very interesting split early in the season between the top teams like Red Bull and Ferrari, who are opting for a more traditional design, and the mid-pack challengers, which are being more aggressive with their aerodynamics. Seeing how this plays out during the season will be very interesting. As for RBR's design, it's attractive, but wasn't easy to pen, according to Newey, who found the turbocharged V6s a difficult piece in the new F1 puzzle.
"Whereas the V8s were a very well-known package, with these power units, the engine itself is easy enough to install, but then of course you've got the turbocharger, the intercoolers, and the electrical side in terms of the motor generator units and much bigger batteries," Newey told the official Formula One website.