No Reserve 1998 Infiniti I30 Sedan 3.0l V6 Moonroof Leather Handyman's Special on 2040-cars

Auto blog

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Eau Rouge Lite: Infiniti Q50 gets 400-hp, twin-turbo V6

The Infiniti Q50 Eau Rouge is still (probably) dead. But as consolation prizes go, a new 400-horsepower, twin-turbocharged V6 isn't bad. The 3.0-liter biturbo will be offered in two different states of tune. Enthusiasts will flock towards the aforementioned 400-hp model, but the first VR series engine will also be sold in a 300-hp version, as well. Regardless of output, both engines have a very broad torque curve, ranging from 1,600 to 5,200 rpm with either 350 or 295 pound-feet. A Mercedes-sourced, 2.0-liter, turbocharged four-cylinder will serve as the Q50's new base engine, matching the CLA250's 208 hp and 258 lb-ft of torque. The hybrid powered Q50 soldiers on, as do a line of standard seven-speed automatic transmissions. The naturally aspirated 3.7-liter V6 appears to be gone. Another big enhancement for the updated Q50 is a revised version of the widely disliked Direct Adaptive Steer system. Infiniti says its engineers "optimized the control logic to improve feedback from the road" – a huge area of complaint with the current steer-by-wire system. The Q50's new engine lineup will be showrooms later this winter. Read on for the official press release from Infiniti, and stay tuned for more from the brand – including the new Q60 Coupe – at the upcoming Detroit Auto Show. Related Video: Infiniti Announces New 3.0-liter V6 Twin-Turbo Engine – the Most Advanced V6 Ever Offered by Infiniti • New VR-series engine becomes the lightest, most powerful, cleanest and most fuel-efficient V6 engine that Infiniti has ever offered• Two power outputs available: 400 or 300 horsepower• Series of technical innovations enhance drivability and performance• Compact layout features new integrated exhaust manifold• The 3.0-liter V6 twin-turbo engine family will first be available in the 2016 Infiniti Q50 sports sedan NASHVILLE (Dec. 15, 2015) – Infiniti's new compact, lightweight 3.0-liter V6 twin-turbo engine is the most advanced V6 engine that the brand has ever offered, striking an ideal balance between drivability, efficiency, and performance. The 3.0-liter V6 twin-turbo is an all-new engine from the new and exclusive VR- series powertrain family, born out of the brand's longstanding heritage of V6 powertrain production. The new engine has been engineered to empower the driver and offer increased power and torque and higher levels of efficiency than any comparable predecessors from the company.

Infiniti Q50 steer-by-wire system took 10 years to develop [w/video]

Infiniti's Direct Adaptive Steering (DAS) is quite a novelty - the system employs no physical connection between the steering wheel and the front wheels under normal circumstances and instead relies on a computer, clutch and steering-angle actuator to guide vehicles down the road with input from the driver.
In our First Drive review of a 2014 Infiniti Q50 equipped with the system, we weren't overly impressed by the artificial feedback. But we can't help but be impressed with how long Infiniti spent on its development: a full 10 years, according to Autoline Daily in the video report below. A staggering 70 percent of the research and development time spent on DAS was devoted to getting the steering feel right, and unfortunately, our first impression suggests their results still leave something to be desired, as we found it lacked the sporty feeling a sport sedan should have.
The weight of DAS is comparable to that of a conventional steering system due to its complexity. For example, three ECUs are used in the first-generation DAS system to ensure there's never a loss of steering, but Infiniti is refining the technology and is working to simplify it to reduce weight. One day Infiniti hopes that only one ECU will be needed to control DAS. We just hope it doesn't take the Japanese automaker another ten years to get the steering feel right.