1999 White! on 2040-cars

Auto blog

Infiniti spruces up the Q50 for 2018

Though overshadowed by the literally larger QX80 Monograph SUV concept, Infiniti's revised 2018 Q50 still made an appearance at the stand in New York. It joins a long list of cars including the Acura TLX, Hyundai Sonata, Mitsubishi Outlander Sport, VW Golf, and Toyota Sienna and Yaris that all went under the knife for the show. The Infiniti Q50's update may be one of the most mild, though, as it only consisted of cosmetic changes. Up front, the grille has been enlarged and given more prominent swoops at each corner. On the S version, sharp creases appear on either side of the primary grille and descend down to the lower, center grille. The outboard grilles of the front bumper have changed shape, too, and they now feature contrasting black plastic trim. The standard Q50 has a new bumper, as well, and though less aggressive than the S version, it still looks sporty with a more pronounced chin spoiler. Both iterations of the 2018 Q50 share the same tail end. The main change is in the rear bumper. A center diffuser has now appeared at the base. The contour of the diffuser is echoed by two creases in the bumper at progressively higher points. On the S model, the panel between the diffuser and the first crease is painted black, and the diffuser is painted in the body color. The standard model's entire bumper is painted in body color, and the diffuser looks to be a more muted black or gray. Inside, even fewer changes have been made. A new steering wheel with reshaped thumb grips is now included. Infiniti also added new stitching to the instrument panel cover and leather shift knob. You'll be able to examine all of these changes up close at an Infiniti dealer this summer when the cars arrive. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2016 Infiniti Q50 Red Sport 400 First Drive

When the original Infiniti Q50 arrived to replace the long-lived G Sedan, our reaction was lukewarm. It lacked poise, refinement, and efficiency, and we hated the Direct Adaptive Steer system. We originally thought of this steer-by-wire system as, "technology for the sake thereof." Infiniti is hoping to address these shortcomings with the 2016 Q50. It gets a new and far improved version of DAS, and a 3.0-liter, twin-turbo V6 sits atop a diversified powertrain family. And at the top of the ladder sits this: the Q50 Red Sport 400. The Red Sport's all-aluminum 3.0-liter V6 pumps out 400 horsepower and 350 pound-feet of torque, the latter of which can be called upon between 1,600 and 5,200 rpm. That low-end thrust is what's most evident out on the road – everything from standing starts to freeway passes are effortless. It's actually kind of ferocious – the tachometer needle climbs relentlessly, and the engine feels strong and purposeful all the way up to its 7,000-rpm redline. It's a refined and smooth powerplant, too, which is a tremendous improvement over the old 3.7-liter V6. The sensations the revised Direct Adaptive Steer system delivers are comparable to the average, modern, electric power-assisted setup. The bigger accomplishment is Infiniti's second-generation Direct Adaptive Steering system. Owners can choose from three steering weights and three levels of responsiveness, but steering adjustments feel more incremental rather than dramatic, so you won't be jarred if you suddenly switch from an aggressive mode to a more comfortable setup. Computer wizardry still can't match natural feedback, but the sensations the revised Direct Adaptive Steer system delivers are comparable to the average, modern, electric power-assisted setup. Make no mistake, that's a huge improvement and it means DAS performs far better dynamically, especially when you ask for its most aggressive behavior. See the differences between the different modes in the video below. Even half-throttle situations in the standard drive mode required counter-steering. Direct Adaptive Steer feels perfectly fine during everyday driving. We spent about 75 percent of our time testing a DAS-equipped car, but hopped into a non-DAS model a the short, 20-mile drive back to our hotel. DAS felt more stable and easy to track down the road – it didn't require the constant, tiny steering inputs of the traditional system.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.