1996 Infiniti I30, No Reserve on 2040-cars

Auto blog

Infiniti recalls Q50 and Q70 Hybrid models

Infiniti is issuing three separate recalls for its Q50 Hybrid and Q70 Hybrid and M35 Hybrid covering roughly 13,794 vehicles in North America.
The larger campaign listed by the National Highway Traffic Safety Administration covers 5,831 examples of its 2014 Q50 Hybrid (shown above) and 2014 Q70 Hybrid in North America, with 5,412 of those in the US and its territories. According to NHTSA, "due to a software error, the electric motor may stop working while the vehicle is being driven using the electric motor only," creating a "stall-like condition." To fix the fault, the company is reprogramming the motor inverter software, and owners should be contacted in mid-November.
The second recall covers just 890 2014 Q50 Hybrid and 2014 Q70 Hybrid models in North America, with 817 of those residing in the US. It's possible that their transmission housings were damaged during manufacturing, and on affected models, the housing could have a crack that might fracture while driving. Dealers will inspect the transmission and faulty examples will be replaced.

2014 Infiniti Q50's novel drive-by-wire steering system recalled

The gradual replacement of mechanical components in automobiles with electronic systems brings with it definite advantages, but also poses certain potential dangers. Just think of the inevitable problems you've encountered with the computer on which you're reading these words and you'll know what we mean. But a computer crashing isn't as problematic as your car going on the fritz when its electronic systems fail.
That's what Infiniti is being reminded of with its new drive-by-wire electronic steering system. The Japanese automaker developed and installed the Direct Adaptive Steering System in its new Q50 sedan, but a small number of those cars on the road are now being recalled due to that system.
According to the National Highway Traffic Safety Administration, on a small number of examples, the Q50's optional by-wire system may fail if the temperature in the engine compartment drops below freezing. There's a backup mechanical setup in place should the electronic system fail, but NHTSA says that the backup system may also fail to engage in time to avoid a crash.

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.