2008 Infiniti G37 Sport Coupe 2-door 3.7l on 2040-cars

Auto blog

Infiniti's variable compression engine in the 2019 QX50 is the first of its kind

The world's first variable compression ratio engine is here, in a production car. That car is the 2019 Infiniti QX50, debuting this week at the Los Angeles Auto Show. The midsize crossover has seen a refresh that has brought it an all-new platform together with new driver assist features, but it's the engine that's the centerpiece here. Nearly everything is continuously variable under the hood of the QX50 – not only the new shift-by-wire XTRONIC CVT. The new VC-Turbo gasoline engine is able to change its compression ratio from 8:1 to 14:1, or anything in between depending of the driving situation; whether there is need for top-end power or turbodiesel-like torque from low revs, or optimized fuel economy. The pistons' reach is continuously adjusted by an electric "Harmonic Drive" motor, which controls a multi-link system, affecting the top-dead-center of the pistons and changing the compression. The engine can also switch between efficiency-maximizing Atkinson cycle and regular combustion cycle, on the go – and there's both multipoint injection and gasoline direct injection employed. The result is 268 horsepower at 5,600 rpm and 280 pound-feet of torque at 4,400 rpm; good figures for a 2.0-liter four-cylinder gasoline engine with a single-scroll turbocharger. Infiniti says that the FWD version's fuel economy of 27 miles per gallon combined is 35-percent better than the previous-generation V6 engine; in AWD guise, it reaches 26 mpg, which is a 30-percent improvement. The new engine is pretty much all-aluminum, but the vaguely magical-sounding "transformative multi-link components" behind the variable compression system are made from high-carbon steel alloy. The engine's multi-link system also enables it to do away with any balancing shafts, and Infiniti compares its smoothness to a V6 rather than a regular four-cylinder. In addition to the aforementioned tech, the VC-Turbo engine has the world's first active engine mount vibration damping system to smoothen its operation even further. Related Video:

Infiniti Q50 Eau Rouge Concept bows again, now with more GT-R [w/video]

Think back to the 2014 Detroit Auto Show and you'll remember the Infiniti Q50 Eau Rouge concept - a sedan that showed the potential design direction for a seriously high-performance take on the Japanese automaker's new entry-level luxury sedan. And while the show car we saw in Detroit was all well and good, it lacked something. Specifically, an engine. Kind of an important thing for a performance concept, right?
Here in Geneva, Infiniti rolled out that same Q50 Eau Rouge, but with one major modification: the sedan now boasts a twin-turbocharged 3.8-liter V6 under its hood - the same engine that's found in the Nissan GT-R supercar. In the Eau Rouge, this V6 is tuned to produce 560 horsepower and 443 pound-feet of torque, sent to the ground via the GT-R's all-wheel-drive system. Of course, this super-hot Q50 is still purely a concept, but Infiniti says that the potent engine underhood will allow the sedan to sprint to 60 miles per hour in less than four seconds, on its way to a top speed of over 180 mph.
The oft-fabled "four-door GT-R" still isn't confirmed for production, so for now, all we can do is cross our fingers (and toes). Check out the Q50 and its new beating heart in the gallery, above, and scroll below to hear what that potent Eau Rouge sounds like.

2017 Infiniti QX30 beefed up and ready for LA debut

Infiniti has released the first details and photos of its new compact crossover. Dubbed the QX30, the latest addition to the premium lineup is set for parallel debuts at the upcoming auto shows in Los Angeles and in Guangzhou, China. And with it, the luxury automaker is going after a younger demographic. Previewed by the QX30 concept unveiled earlier this year in Geneva, the new crossover joins the Q30 hatchback in Infiniti's new "entry-level" model line. Set to be produced at Nissan's mega factory in Sunderland, UK, the QX30 will be the first Infiniti to be built in Europe. But as you might discern from its introduction in LA, it'll form a vital part of the brand's strategy for the US market as well. The design looks instantly recognizable as an Infiniti, looking almost exactly like the Q30... only more rugged. Apart from the increased ride height, suitably ruggedized lower bodywork, and telltale (but slimline) roof rails, it adopts the same curvaceous, organic lines as the hatchback, and signature double-arch grille and kinked C-pillar as you'd expect from any modern Infiniti. The Japanese automaker has yet to show us much of the interior, but it promises an asymmetric design, premium materials, and ergonomic surfaces. Nor has Infiniti revealed much in the way of technical details. What it has told us, however, is that the new QX30 will encompass an all-wheel-drive system capable of sending up to 50 percent of output to the rear wheels, running through a seven-speed dual clutch transmission. Availability of diesel and gasoline engines will depend on the individual market. If its lower-riding stablemate is anything to go by, we should be looking at a 2.0-liter turbo four producing 208 horsepower and 258 pound-feet of torque. Technical specifications are due to be announced closer to its market introduction in the middle of next year. At that point, rivals like the Mercedes GLA, Audi Q3, BMW X1, and Lexus NX will be put on notice as Infiniti joins an increasingly competitive market for premium compact crossovers.