2013 Infiniti Fx37 Premium Sunroof Nav Rear Cam 19k Mi Texas Direct Auto on 2040-cars

Auto blog

Infiniti QX70 is fini, for now

We knew it first as the FX, debuting in 2003 as a bulgingly macho SUV/crossover thing with an impossibly long hood. It was quick and powerful, and lower-slung than typical SUVs, more like a tall wagon. Infiniti later dialed the cartoonishness of it back a few notches and started calling it the QX70. Now, the QX70 is going to take a little break, disappearing from the lineup for a few years while QX50 and QX80 redesigns are rolled out. The QX70 is sporty, with a 325-horsepower 3.7-liter V6. But it's an aging model and a bit of a slow seller - last year, Infiniti moved one-seventh as many QX70s as it did its kid-hauling cousin the QX60 - which seats more people (seven, to the QX70's five) and is less expensive. The QX70 was once popular like that, selling 30,964 as the FX in 2004. But that was long, long ago. Last year it sold 6,261. The QX70 nameplate is expected to be back in 2021 or 2022, in a redesign based on the Nissan Murano and built at Nissan's plant in Canton, Miss. Related Video: Featured Gallery 2015 Infiniti QX70 Plants/Manufacturing Infiniti Crossover SUV redesign

Infiniti QX50 concept previews production model with variable compression engine

Infiniti revealed its QX50 concept ahead of its official debut at the Detroit Auto Show, and despite the concept title, it looks pretty much production-ready. The company calls the crossover "an evolution of the QX Sport Inspiration" concept, and that's certainly accurate. Side-by-side, the QX Sport, which we already figured was previewing a new QX50, and this concept look nearly identical. The primary changes are bumpers and side skirts that feature the obligatory aluminum trim to look like skid plates, and simple black plastic fender flares. The overall result is a crossover that is pleasant but not exactly exciting that bridges the gap between the small and swoopy QX30 and the large QX60. The plain wrapper hides plenty of impressive technology, though. Under the hood is Infiniti's fascinating variable-compression turbocharged engine. It's a 2.0-liter inline-four that can alter its compression ratio to anything between 8:1 and 14:1. The result is an engine that produces an estimated 268 horsepower and 288 lb-ft of torque. Infiniti says the four-cylinder should be about 27-percent more efficient than a comparable V6. In addition, while the company says this concept just shows a potential application of the engine, it's safe to say that you can expect it in the production model. With the new engine, the QX50 will also switch from to a front-drive platform, with all-wheel drive definitely an option or possibly standard; the current QX50 is based on the aging rear-drive FM platform used on other Infinitis and the Nissan 370Z. The other new tech buried in the QX50 concept's body is what Infiniti calls the "first production-ready incarnation" of its ProPilot semi-autonomous technology. The company doesn't go into great detail about what it will do except for handling stop-and-go highway traffic. We would hazard a guess that the system is functionally the same as the one introduced on the Nissan Serena minivan in Japan. It goes by the same name and can handle stop-and-go traffic, as well as maintain the car's lane position and distance behind other cars. It's another safe bet that we'll see this system in the production model. Other details about the car, such as the interior, have yet to be revealed. We're sure to see it as well as other information about the QX50's technology when it makes its full debut in Detroit. Related Video:

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.