Awd 4dr Low Miles Suv Automatic Gasoline 3.5l Dohc Smpi 24-valve V Blue on 2040-cars

Auto blog

Infiniti Emerg-E Concept

The Infiniti Emerg-E is a two-place hybrid gasoline-electric concept that made its world debut at the 2012 Geneva Motor Show. While its sleek shape and stunning styling dropped jaws, those on the green side of things immediately recognized it as a reskinned and updated Lotus 414E - itself a concept based on the Evora that debuted at the same show only two years earlier. Yet there is little wrong with a reworked, Infiniti-badged Lotus boasting 402 horsepower and 738 pound-feet of torque, especially when it features a lightweight, all-aluminum bonded chassis beneath an attractive carbon fiber skin penned by the automaker's Southern California design team.
The hybrid powertrain is all contained aft of the cockpit. Primary propulsion is accomplished with two electric motors, one on each rear wheel, both featuring its own single-speed transmission (this design eliminates the need for a differential and provides electronic torque vectoring control). Energy for the electric motors is stored in a 15-kWh lithium-ion battery placed behind the seats, which is chemically different from the lithium-polymer pack Lotus used in its 414E. Auxiliary propulsion comes from a Lotus-designed, all-aluminum, 1.2-liter three-cylinder gasoline engine, rated at 50 horsepower, that serves as a range-extender after the 30-mile life of the battery pack is extinguished. Teamed with an 8.1-gallon fuel tank, the combo allows the Emerg-E to cruise about 300 miles without stopping.
Offered the chance to take the Emerg-E for a quick loop around an autocross course in Southern California, I jumped at the opportunity.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Andy Palmer leaves Renault-Nissan to serve as CEO of Aston Martin

Aston Martin has been without a helmsman since Ulrich Bez stepped down from the chief executive office at the end of last year, stepping back to serve as non-executive chairman in a semi-retired ambassadorial capacity. The British automaker, now on the cusp of a new era, has been running without a CEO since, but has now named Bez's replacement in Andy Palmer.
If you don't recognize the name, you should: Palmer has worked under the Renault-Nissan Alliance for decades now, rising through the ranks to become one of the top executives under Carlos Ghosn. Most recently he was serving as executive vice president of the entire group and chairman of the Infiniti brand, but like Carlos Tavares, who recently left Renault to run Peugeot, Palmer is now embarking on a new mission as CEO of Aston Martin.
Once the transition period is complete at the start of October, Palmer's role as Chief Planning Officer at Renault-Nissan will be assumed by Philippe Klein, who steps up from his current role as executive vice president of product planning for Renault. Read the statements from both companies below.