2008 Infiniti Ex35 Journey Sport Utility 4-door 3.5l on 2040-cars

Auto blog

The Infiniti Q60 Black S gets an F1 KERS system

This is the Infiniti Q60 Black S that will be debuting at the Geneva Motor Show, sporting some intense bodywork and an F1-inspired powertrain. It exists to draw a closer parallel between the Renault F1 program and the Infiniti brand – a relationship that's surely easier to understand in Europe than it is here, but so be it. Other than the wild bodywork, which includes a heavily sculpted front fascia, bigger side sills, two howitzer-sized exhaust pipes, and a massive rear wing, there's the F1-inspired KERS system. Exactly what that will be is up in the air; the F1 system is complex and expensive. While Infiniti says they want to engineer a road-going solution that's as similar as possible to the F1 KERS system, it's likely it'll be watered down a bit for production. View 12 Photos All in all, the 3.0-liter, twin-turbo V6 and the KERS system should combine to produce about 500 horsepower. That's all well and good, if it makes it out of concept car purgatory. Remember the Q50 Eau Rouge, the last Infiniti that got car enthusiast's undivided attention? Well, it got canceled. We're not sure what the appeal of an F1 tie-in would be to American shoppers, so who knows if the Black S will emerge as a rest-of-world special, or at all. In any event, we should have more details around Geneva, so stay tuned. Image Credit: Live photos copyright 2017 Drew Phillips / Autoblog.com Geneva Motor Show Infiniti Coupe Concept Cars Performance Videos Original Video 2017 Geneva Motor Show infiniti q60

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.

The yin and yang of the 2017 Infiniti Q50 Red Sport 400

When we first drove the Q50 Red Sport 400, Infiniti had the car out at a prepared slalom-and-cone course in a large, open parking lot. The car was stacked up against another Q50 without the Direct Adaptive Steer steer-by-wire system, and the course was designed to show that the DAS-equipped Red Sport 400 (it's a $1,000 option) required less steering input to master the same course. With all due respect to Infiniti, which is invested in this unfortunate system and has been working hard to revise it, the comparison doesn't make a lot of sense. The non-DAS Red Sport 400 has a steering ratio of 15:1 in RWD and 16.7:1 in AWD forms. The DAS system can vary between 12:1 and 32.9:1 in RWD and 11.8:1 to 32.3:1 in AWD flavors. At its extremes, the DAS system's ratio is vastly different than the fixed-ratio cars. So sure, with a super-quick steering ratio available, the DAS driver's going to do less work. It's all in the gearing. Does this mean it's better, that the steering feel is more natural, that it's easier to hustle quickly? The amount the driver saws at the wheel isn't an indication of that, necessarily. After a few days in a rear-drive Red Sport 400, I'm saying that the spooky disconnection between the driver and the front wheels would be a severe deficit to a driver on a real autocross course. It's not like the DAS system is choosing bad ratios within its range, it's just not supplying the feedback to make it enjoyable. Knowing what your front tires are up to is critical. I can hear you saying right now, "But what Q50 Red Sport 400 owners are going to autocross their cars?" Sure, but it was just a means to an end: showing off the DAS in a good light. And in that case, it probably did. The thing is, in isolation, not back-to-back with a non-DAS car with a slow steering ratio, the DAS system has the same issues it's always had: It simply doesn't feel natural. It doesn't feel intuitive. There doesn't seem to be any real advantage over a slightly quicker rack. I don't hear about people making buying decisions based on how much work they have to do sawing at the wheel, do you? So, that's one side of the Q50 coin – one that's hard to ignore if you're an enthusiast and steering feel is an important connection between you and the vehicle you just dropped a large hunk of change on, and will be spending a lot of your time in. The other is that there's a really compelling reason to drive a Red Sport 400: The 3.0-liter, twin-turbocharged V6 is a monster.