2013 Hyundai Elantra Gls on 2040-cars

Auto blog

2017 Genesis G90 signals Equus' evolution

As predicted, Hyundai's executive-level Genesis EQ900 has crossed the Pacific to make its big debut at the 2016 Detroit Auto Show. Known in the North American market as the Genesis G90, the first-ever vehicle for the new Genesis brand will occupy the same position as the old Hyundai Equus at the top of the heap. That means lots of interior space, most of which is finished in luxurious materials and stuffed full of technology. From the lone interior image Hyundai sent out, the cabin is clearly an evolution of the Equus' aesthetic. There's a large swath of real wood on the dash, which is topped by Nappa leather. The expansive center display sits atop a high, curving transmission tunnel that houses the traditional knob-and-dial controller for the infotainment, as well as the shift lever and HVAC buttons. Hyundai stretched the G90's wheelbase by 4.5 inches over the old Equus, but in the process, it removed an inch of backseat legroom. Now there's only 37.8 inches in the second row, which doesn't compare favorably to the 42.9 inches in the back of the Audi A8L or the 43.1 inches offered in the Mercedes-Benz S-Class. Unlike the EQ900 that was shown early last month, the US-market G90 will only offer a pair of engines. On the one end, we have a 3.3-liter, twin-turbocharged V6, capable of 365 horsepower and 376 pound-feet of torque. The 5.0-liter V8 from the Equus will be offered too, and it still churns out 420 hp and 383 lb-ft of torque. But with peak twist from the V6 model available between 1,300 and 4,500 rpm and less than 60 horsepower difference between the two engines, it sounds like the smaller engine will be the one to have, especially if it proves significantly lighter (Hyundai hasn't published the G90's weight yet). Both engines are paired to eight-speed automatic transmissions and can be paired with Hyundai's H-TRAC all-wheel-drive system. Look for more on the new G90 from its Detroit debut. And in the meantime, head over to our December 9 report on the new flagship model for more on Peter Schreyer's design and the safety equipment.

Hyundai ix35/Tucson replacement comes into view

Last week, we showed you some leaked images of the Hyundai Intrado Concept, a vehicle set for debut at next week's Geneva Motor Show. We suspect that the Intrado will act as the inspiration for the next Hyundai Tucson, known elsewhere in the world as the ix35. Now, we can bring you the first images of that car undergoing testing.
There is quite a lot of cladding on this prototype, although we can make out a set of slim headlights that are similar in shape to the Intrado. The two cars also share a similar shape in the greenhouse, although obviously the prototype wears an extra set of doors behind the B-pillar.
Don't be fooled by the heavy cladding on the rear hatch, either, as it's just there to disrupt the look of the profile. It's fairly easy to spot where the roofline starts its dive down.

Hyundai bringing 1,000-hp Genesis Coupe to SEMA

Hyundai has just unleashed its first volley at the SEMA crowd in the form of the Genesis Coupe you see above, and it's a duesy. By partnering with the powertrain gurus from Bisimoto, Hyundai has managed to cram a thousand horsepower into this highly accessorized black and blue machine, using a mill based on the naturally aspirated Genesis Coupe 3.8 R-Spec engine block.
The big powers are a pair of Bisimoto/Turbonetics BTX6462 turbochargers, which are joined by a full set of aftermarket internals that include new connecting rods, camshafts, forged pistons, fuel pump and fuel injectors, and a massive intercooler. With all that power, the chassis was going to need some updates, such as a complete roll cage and a custom coilover suspension setup.
As is expected from a SEMA show car, there is a bespoke graphics and bodywork package, highlighted by a carbon fiber hood and decklid. Check out the two images provided by Hyundai and the press release below for all the details.