Limited Turbo Panoramic Sunroof Heated Leather Garmin Navigation We Finance on 2040-cars

Auto blog

Hyundai recalls 43k Genesis and Equus models for faulty lighting

As you can imagine, it'd be a bit of a problem if the brake lights on your car didn't work. And that, unfortunately, is precisely the problem that Hyundai has found with some of its higher-end offerings, prompting the Korean automaker to issue a recall. (One of a great many recalls issued by the National Highway Traffic Safety Administration today, as you can no doubt see.) The problem apparently revolves around a failure in the circuit that's supposed to illuminate the taillights when the driver hits the brakes. If that doesn't work, of course, the vehicle behind would be more likely to crash into the Hyundai in question. As a result, Hyundai is recalling precisely 42,925 units, split between the 2009-2011 Genesis (manufactured between April 30, 2008, and November 21, 2010) and the 2011 Equus (manufactured between July 31, 2010 and November 21, 2010). Owners of those vehicles will be notified to bring their vehicles in to have their brake light circuits repaired. RECALL Subject : Inoperative Stop Lamps Report Receipt Date: NOV 07, 2014 NHTSA Campaign Number: 14V713000 Component(s): EXTERIOR LIGHTING Potential Number of Units Affected: 42,925 Manufacturer: Hyundai Motor America SUMMARY: Hyundai Motor America (Hyundai) is recalling certain 2009-2011 Hyundai Genesis vehicles manufactured April 30, 2008, to November 21, 2010, and 2011 Hyundai Equus vehicles manufactured July 31, 2010, to November 21, 2010. Due to a circuit failure, the stop lamps in the affected vehicles may not illuminate. CONSEQUENCE: A following vehicle may not recognize that the vehicle is slowing or coming to a stop if the stop lamps on the vehicle do not illuminate as expected. There is an increased risk of a rear-end crash as a result. REMEDY: Hyundai will notify owners, and dealers will repair the stop lamp switch circuit, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Hyundai customer service at 1-714-865-3920. Hyundai's number for this recall is 125. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Hyundai Motor Group reveals the E-GMP modular electric platform

Just as Volkswagen has the MEB platform for its ID. line of electric cars, Hyundai Motor Group is launching a modular architecture of its own. It's called E-GMP for "electric-global modular platform," and the motor and battery powertrain is called PE for "power electric." These components will underpin models from Hyundai, Kia, Genesis and the new Ioniq brand. The first to launch with it will be the Ioniq 5. One of the interesting aspects of this platform is that it will be designed with rear-wheel drive in mind. Like VW's and Tesla's EVs, the basic layout will feature a rear-mounted motor powering those back wheels, and the battery pack fits in the floor between the wheels. All-wheel drive will be available on some of these models with the addition of a second, front-mounted motor. That front motor will be able to mechanically disconnect from the front drive axles when not needed, allowing for less mechanical drag and more efficient driving. Hyundai is promising impressive performance from the E-GMP and its batteries and motors. The company claims that a car built on the platform could be capable of 0-62 mph sprints of 3.5 seconds with a top speed of about 162 mph. This will vary depending on motors, and Hyundai Motor Group revealed that there are three outputs of motor in development. Maximum range is expected to be 311 miles on the WLTP cycle. Hyundai didn't give exact power outputs or battery capacity in kWh, though. The battery pack is made up of standardized modules that can be added or subtracted depending on the needs of the vehicle, and the individual cells are pouch-type, similar to what GM is using in its Ultium batteries. The E-GMP cars will also support fast charging up to 800V and 350kW, so an 80% charge from empty could happen in just 18 minutes. Two-way charging will also be supported, so your electric Hyundai or Kia could provide up to 3.5kW of power to various appliances or even to another EV. Hyundai says you could run a "midsize" air conditioner and a 55-inch TV for up to 24 hours with an E-GMP car. Hyundai 45 View 14 Photos We won't have to wait long to see the first car based on this platform. The Ioniq 5, which will take design inspiration from the Hyundai 45 concept, will launch next year. The Ioniq 6, based on the Hyundai Prophecy concept, will come in 2022 and the Ioniq 7 in 2024. The first Kia model will be a crossover revealed next year, and it will have a performance variant.

Recharge Wrap-up: Peugeot eF01 folding e-bike, Australia orders Hyundai FCEVs

Australia has ordered 20 hydrogen powered vehicles from Hyundai. The Australian Capital Territory Government in Canberra will take delivery of the fleet of Hyundai's next-generation fuel cell vehicles (set to replace the Tucson Fuel Cell in 2018) for its Renewable Transport Fuels Test Berth project. As part of the program, the vehicles will be powered by hydrogen made with a Siemens Silyzer System with electricity from Hornsdale Wind Farm in South Australia. The Siemens refueler is capable of powering over 1, 000 fuel cell vehicles each averaging 14,000 miles per year. Read more from Hyundai. Peugeot has unveiled its eF01 electrically assisted folding bike. Meant to facilitate multimodal travel, Peugeot's eF01 folds up quickly to be thrown in the trunk of a car, carried on public transport, or wheeled in its folded position while walking. It's a little hefty, at 37 pounds, but its compactness helps make up for that. It can be charged in the cargo area of any vehicle with a 12-volt outlet, so it's ready to provide 18 miles of electric assistance at speeds of up to 12 mph. It can also communicate with a smartphone via Bluetooth to show current charge and range. Read more from Peugeot. A123 Systems will collaborate with Argonne National Laboratory to create safe, better performing lithium-ion batteries. The partners will focus on cathode technology in order to increase energy density and durability in order to improve the driving range of electric vehicles. A123 expects to increase energy density and range by more than 60 percent over its current offerings. "Working with Argonne will further advance our already strong presence in plug-in vehicles and support the increasing market demand globally," says A123 Systems CEO Jason Forcier. "We look forward to expanding our customer base as we offer increasingly greater range to our plug-in vehicle programs without compromising on the life and safety performance that the market has come to expect from A123." Read more in A123's press release. Featured Gallery Peugeot eF01 Folding E-Bike Related Gallery 2015 Hyundai Tucson Fuel Cell: LA 2013 View 19 Photos News Source: Hyundai, Peugeot, A123 Systems Green Hyundai Peugeot Alternative Fuels Bikes Electric Hydrogen Cars recharge wrapup