2.0t Limited 2.0l Cd Turbocharged Front Wheel Drive Power Steering Sun/moonroof on 2040-cars

Auto blog

Hyundai recalling 140k Sonatas over seatbelts

Hyundai is recalling about 140,000 examples of the 2015 Sonata in North America to repair a problem with the front passenger seatbelt not latching. Specifically, the problem affects 129,000 of the sedans in the US and 10,401 in Canada. On these models, if the seatbelt tongue is forcibly inserted into the buckle at a certain angle, then it can jam and not latch. Only the front passenger side is affected, and driver would be notified because a warning light would illuminate on the dashboard. The safety campaign covers 2015 Sonatas with production dates between April 25 and December 4, 2014, according to a statement to Autoblog from Hyundai, but there are no reports of injuries from this issue. Owners will receive notification by mail in about a month. To fix the problem, dealers will inspect the part and repair or replace it as necessary. Hyundai has already notified NHTSA about the recall, but the campaign hasn't been added to the agency's website yet. Transport Canada has already posted some information about it, though. Related Video: Hyundai Statement: We recently notified NHTSA of a safety recall we are initiating in the U.S. to repair or replace the front passenger seat belt buckle in approximately 129,000 2015 Sonatas that were built beginning April 25, 2014 through December 4, 2014. We are initiating this action to ensure the safety and quality of the vehicles and the continued satisfaction of our customers. In some cases, if the front passenger seat belt "tongue" is inserted into the buckle forcibly at an angle, the buckle may jam, preventing the front passenger from fastening the seat belt. The front passenger's seat belt warning lamp will illuminate if the front passenger seat belt is not buckled while the seat is occupied. This condition does not result in partial latching of the belt and does not affect the driver or rear passenger seat belt buckles. There are no reports of injuries attributed to this condition.

2016 Hyundai Sonata Hybrid, PHEV gets conservative new look, more range

The plug-in hybrid middle ground between the 2015 Toyota Prius Plug-In (11 miles of EV range) and the 2016 Chevrolet Volt (50 miles) has long been the Ford domain. The Blue Oval has two plug-in hybrids with 20 miles of all-electric range, its 2015 Fusion and C-Max Energi Plug-in Hybrids. Entering this fray later this year will be the 2016 Hyundai Sonata Plug-In Hybrid, which will arrive with 22 miles of EV range and 93 MPGe. Hyundai made that announcement at the Detroit Auto Show this morning, saying that 22 miles is "farther than any other midsize PHEV sedan." Those zero-emission miles will come from a 9.8-kWh lithium polymer battery and a 50-kW electric motor. Once the pack runs out, Hyundai expects the PHEV to get 40 mpg combined (as well as 38 mpg city and 43 mpg highway) thanks to the gas-powered heart of the powertrain: a 154-horsepower, 2.0-liter Nu GDI four-cylinder engine that puts out 140 pound-feet of torque. When combined with the motor, the total system output is 202 horsepower. Hyundai is also showing off a non-plug Sonata Hybrid, which is expected to get a 10-percent fuel economy boost. The current version gets 38 mpg, combined, so that hints at around 42 mpg on the sticker when the car arrives in dealerships. The plugless model has to make due with a 51-hp, 38-kW electric motor that offers 151 pound-feet of torque and a net power rating of 193 horsepower. The two new Sonata Hybrid models have their own, more aerodynamic front and rear fascias as well as "purposefully unique wheels" that help drop the drag coefficient to just 0.24. The PHEV has a unique grille and a charge port on the front driver's side. Both models will arrive in dealerships later this year. Featured Gallery 2016 Hyundai Sonata Plug In Hybrid View 12 Photos Green Detroit Auto Show Hyundai Fuel Efficiency Hybrid Sedan

Genesis bringing an EV concept and G90 to New York Auto Show

It's official, the entire Hyundai Group has plans for the New York Auto Show. During the Hyundai Sonata press launch in South Korea, design head Luc Donckerwolke told Roadshow "You'll have an electric show car for Genesis." This year will be the charm for Genesis and EVs, after showing the GV80 SUV concept and its hydrogen fuel cell powertrain in 2017, and the electric Essentia coupe concept last year. We will also see the production version of the U.S. market Genesis G90 and its mongo grille. The premium brand's debuts will join the new Sonata sedan and Venue crossover, and an as-yet-unnamed Kia show car expected to be our version of the SP Signature concept potentially called Tusker. Hyundai-Kia isn't getting its electric razzle dazzle ready for New York alone. Auto Express reports the group is working on a new electric car platform to serve the carmaker the same way Volkswagen's MEB architecture serves the German group's brands. At the moment, the only four EVs in the South Korean automaker's range are the Hyundai Kona and Ioniq, and the Kia e-Niro and Soul. They are all built on ICE platforms, the Kona and e-Niro still proving popular enough for this year's planned UK-market production to sell out already. According to a "company insider," the dedicated EV platform is around two years away and will focus on B- and C-segment cars. That's the same year that Genesis is expected to have its EV ready, but unless the luxury arm has plans to dip its grille into C-segment waters, Genesis likely has other EV platform plans. By 2025, Hyundai and Kia have said they'll have 14 EVs in the combined lineup as part of 38 electrified offerings. Whatever's on the way could prove far more radical than today's offerings. Donckerwolke told Auto Express that in order to attract the future EV buyers that aren't necessarily car people, "[You] have to ask whether you want science fiction or whether you want to conform. We can create something that doesn't appeal to someone in the traditional sense." If the head designer gets his way, 3D-printing will help whip up those attractions. Last year's Essentia concept showed off 3D-printed carbon fiber ornament, but the potential goes much further.