2024 Hyundai Santa Fe Sel on 2040-cars

Auto blog

2017 Genesis G90 signals Equus' evolution

As predicted, Hyundai's executive-level Genesis EQ900 has crossed the Pacific to make its big debut at the 2016 Detroit Auto Show. Known in the North American market as the Genesis G90, the first-ever vehicle for the new Genesis brand will occupy the same position as the old Hyundai Equus at the top of the heap. That means lots of interior space, most of which is finished in luxurious materials and stuffed full of technology. From the lone interior image Hyundai sent out, the cabin is clearly an evolution of the Equus' aesthetic. There's a large swath of real wood on the dash, which is topped by Nappa leather. The expansive center display sits atop a high, curving transmission tunnel that houses the traditional knob-and-dial controller for the infotainment, as well as the shift lever and HVAC buttons. Hyundai stretched the G90's wheelbase by 4.5 inches over the old Equus, but in the process, it removed an inch of backseat legroom. Now there's only 37.8 inches in the second row, which doesn't compare favorably to the 42.9 inches in the back of the Audi A8L or the 43.1 inches offered in the Mercedes-Benz S-Class. Unlike the EQ900 that was shown early last month, the US-market G90 will only offer a pair of engines. On the one end, we have a 3.3-liter, twin-turbocharged V6, capable of 365 horsepower and 376 pound-feet of torque. The 5.0-liter V8 from the Equus will be offered too, and it still churns out 420 hp and 383 lb-ft of torque. But with peak twist from the V6 model available between 1,300 and 4,500 rpm and less than 60 horsepower difference between the two engines, it sounds like the smaller engine will be the one to have, especially if it proves significantly lighter (Hyundai hasn't published the G90's weight yet). Both engines are paired to eight-speed automatic transmissions and can be paired with Hyundai's H-TRAC all-wheel-drive system. Look for more on the new G90 from its Detroit debut. And in the meantime, head over to our December 9 report on the new flagship model for more on Peter Schreyer's design and the safety equipment.

Hyundai cranks the Tucson to 700 hp for SEMA

The annual SEMA Show doesn't kick off in Las Vegas until Nov. 3, but Hyundai is getting an early start by teasing another collaboration with the talented tuners at Bisimoto Engineering. Following up on their high-performance takes on the Sonata, Genesis Coupe, and Elantra GT of past years, the attention turns to the Tucson. Now that the crossover packs over 700 horsepower, Bisimoto prefers to describe it as a "Brute Ute." To crank that much power out of a Tucson, the tuners perform quite a long list of modifications to Hyundai's 2.4-liter Theta-II four-cylinder. Among them, the mill gets strengthened internal parts, a new cam, high-boost turbo, and updated management system. Bisimoto then routes the grunt through a six-speed manual gearbox. The tuners match the massive power with an appropriately wild look. Up front, the normal grille is gone, and now all that's visible is a massive intercooler. The blue Tucson also hunkers low over 19-inch wheels thanks to a custom air suspension, and bigger brakes should help slow things down at high speed. The interior also gets outfitted with an upgraded stereo, and there's now a roll cage in there, too. While only being shown currently in the sketch above, we expect to get all the angles at SEMA in November. Bisimoto Engineering's First CUV is the Most-Powerful Tucson Ever FOUNTAIN VALLEY, Calif., Sept. 21 2015 –Hyundai has revealed the most-powerful 2016 Tucson ever created, built by the powertrain gurus at Bisimoto Engineering for 2015 SEMA. Partnering for a fourth straight year, Bisimoto's "Brute Ute" will be revealed at Hyundai's SEMA press conference on November 3 at 11:30 a.m. PT, in Las Vegas. Utilizing Hyundai's 2.4-liter "Theta-II" power plant as the starting point for the build, similar to last year's 2015 Sonata, Bisimoto mated strengthened internals with fast-burning flex-fuel, a high-boost turbocharger and an upgraded engine management system to put down more than 700 horsepower to the wheels through a 6-speed manual transmission. This rendition of the 2016 Tucson was built with the ultimate vision of packing world-beating performance and technology into a brand-new, unexpected vehicle platform. "The 2016 Tucson was the perfect platform for this year's build, offering me the opportunity to captivate a wider audience by tapping into the growing popularity of the CUV market," said Bisi Ezerioha, owner and chief engineer, Bisimoto Engineering.

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.