2014 Hyundai Genesis Coupe 3.8 Ultimate on 2040-cars

Auto blog

Hyundai delivers its first Tucson Fuel Cell to a California customer

With expected pomp and circumstance, but short of a marching band, Hyundai delivered its first Tucson Fuel Cell crossover to the Bush family in Southern California on Tuesday. Dave Zuchowski, president and chief executive officer of Hyundai Motor America, was on hand to officiate along with an array of other government officials, including California Air Resources Board chairman Mary Nichols. The automaker is touting the emissions-free vehicle as the "world's only mass-produced fuel cell vehicle" as it travels down the same assembly line as the other Tucson models - its production is scalable, based on demand.
The Tucson Fuel Cell replaces the standard model's 2.4-liter, four-cylinder, gasoline combustion engine with a 100-kW fuel cell stack, which sends power to a 100-kW (134 horsepower and 221 pound-feet of torque) electric motor driving the front wheels. A 24-kW battery pack, shared with the Hyundai Sonata Hybrid, is used for storage. The vehicle earns the customer a combined 50 MPGe, while earning the automaker up to $130,000 through California's ZEV credit system.
As the hydrogen refueling infrastructure is extremely underdeveloped, Hyundai will initially only offer the Tucson Fuel Cell on a lease program to customers in the Los Angeles/Orange County areas, where it has approved six stations with the 700-bar (WEH TK17 pistol-grip nozzle) pumps. The automaker has packaged the program with a $2,999 drive-off, with payments of $499 per month for 36 months. To nearly eliminate operating expenses, the automaker is throwing in "unlimited free hydrogen refueling" (keep in mind that the leasee is only contracted to 12,000 miles each year, so that will put a cap on how much free fuel flows from the pump) along with the company's At Your Service Valet Maintenance at no extra cost.

2017 Genesis G90 signals Equus' evolution

As predicted, Hyundai's executive-level Genesis EQ900 has crossed the Pacific to make its big debut at the 2016 Detroit Auto Show. Known in the North American market as the Genesis G90, the first-ever vehicle for the new Genesis brand will occupy the same position as the old Hyundai Equus at the top of the heap. That means lots of interior space, most of which is finished in luxurious materials and stuffed full of technology. From the lone interior image Hyundai sent out, the cabin is clearly an evolution of the Equus' aesthetic. There's a large swath of real wood on the dash, which is topped by Nappa leather. The expansive center display sits atop a high, curving transmission tunnel that houses the traditional knob-and-dial controller for the infotainment, as well as the shift lever and HVAC buttons. Hyundai stretched the G90's wheelbase by 4.5 inches over the old Equus, but in the process, it removed an inch of backseat legroom. Now there's only 37.8 inches in the second row, which doesn't compare favorably to the 42.9 inches in the back of the Audi A8L or the 43.1 inches offered in the Mercedes-Benz S-Class. Unlike the EQ900 that was shown early last month, the US-market G90 will only offer a pair of engines. On the one end, we have a 3.3-liter, twin-turbocharged V6, capable of 365 horsepower and 376 pound-feet of torque. The 5.0-liter V8 from the Equus will be offered too, and it still churns out 420 hp and 383 lb-ft of torque. But with peak twist from the V6 model available between 1,300 and 4,500 rpm and less than 60 horsepower difference between the two engines, it sounds like the smaller engine will be the one to have, especially if it proves significantly lighter (Hyundai hasn't published the G90's weight yet). Both engines are paired to eight-speed automatic transmissions and can be paired with Hyundai's H-TRAC all-wheel-drive system. Look for more on the new G90 from its Detroit debut. And in the meantime, head over to our December 9 report on the new flagship model for more on Peter Schreyer's design and the safety equipment.

Genesis bringing an EV concept and G90 to New York Auto Show

It's official, the entire Hyundai Group has plans for the New York Auto Show. During the Hyundai Sonata press launch in South Korea, design head Luc Donckerwolke told Roadshow "You'll have an electric show car for Genesis." This year will be the charm for Genesis and EVs, after showing the GV80 SUV concept and its hydrogen fuel cell powertrain in 2017, and the electric Essentia coupe concept last year. We will also see the production version of the U.S. market Genesis G90 and its mongo grille. The premium brand's debuts will join the new Sonata sedan and Venue crossover, and an as-yet-unnamed Kia show car expected to be our version of the SP Signature concept potentially called Tusker. Hyundai-Kia isn't getting its electric razzle dazzle ready for New York alone. Auto Express reports the group is working on a new electric car platform to serve the carmaker the same way Volkswagen's MEB architecture serves the German group's brands. At the moment, the only four EVs in the South Korean automaker's range are the Hyundai Kona and Ioniq, and the Kia e-Niro and Soul. They are all built on ICE platforms, the Kona and e-Niro still proving popular enough for this year's planned UK-market production to sell out already. According to a "company insider," the dedicated EV platform is around two years away and will focus on B- and C-segment cars. That's the same year that Genesis is expected to have its EV ready, but unless the luxury arm has plans to dip its grille into C-segment waters, Genesis likely has other EV platform plans. By 2025, Hyundai and Kia have said they'll have 14 EVs in the combined lineup as part of 38 electrified offerings. Whatever's on the way could prove far more radical than today's offerings. Donckerwolke told Auto Express that in order to attract the future EV buyers that aren't necessarily car people, "[You] have to ask whether you want science fiction or whether you want to conform. We can create something that doesn't appeal to someone in the traditional sense." If the head designer gets his way, 3D-printing will help whip up those attractions. Last year's Essentia concept showed off 3D-printed carbon fiber ornament, but the potential goes much further.