Auto blog

2022 Rivian R1T vs. 2022 Ford F-150 Lightning vs. GMC Hummer EV Pickup | How they compare on paper

The 2022 Rivian R1T has arrived, ushering in the era of the production electric pickup truck. The Rivian reviews are in, and spoiler alert: They're pretty good. Curious how the new battery-powered truck stacks up to its forthcoming competitors? Well, you've come to the right place. Rivian beat all of Detroit's big automakers to market in the half-ton segment, but probably not by the margin the startup would have liked. Ford's answer is the F-150 Lightning, which is due to enter production early next year, coming hot on the heels of GM's first entry into the space – the GMC Hummer EV pickup – which is scheduled to come off the line late this fall. While all three are pickups, they're aimed at distinctly different buyers, as a perusal of their specifications will reveal. Let's have a look, shall we?   Disclaimer: Before we dive in on this one, we'd like to note that while we've made our best effort to verify the specs provided, the Rivian is brand-new and the others are still in the prototype phase. Some of these figures may be inaccurate or may simply change before production. This is all hypothetical until you can actually cross-shop them anyway, right? Cool. End disclaimer. Let's start with the powertrains. They're all battery-electric trucks engineered on a modular rear-wheel-drive configuration engineered to accommodate (theoretically, anyway) up to four electric drive units. Rivian actually makes the most use of this with a quad-motor setup producing 835 horsepower and 908 pound-feet of torque with its high-output initial model. GMC's three-motor Hummer has the R1T beat with its estimated 1,000-horsepower output, while Ford's (also three-motor) comes in with a far more modest 563 horses. This is an excellent illustration of our above point that these are not all engineered for the same crowd. Ford's F-150, which comes in at a lower price point, is meant to be far more mainstream, as its power output suggests.  This theme continues when we look at the dimensions. Despite the image "Hummer" may conjure, GMC's entry actually needs the shallowest parking space. The Rivian is right behind it, with the work-truck-spec Ford extending more than a foot longer than either. What the Hummer lacks in length, it makes up for in girth. It's the widest by a good 5 inches. The Rivian is only slightly pudgier than the F-150, but it's much closer at that end of the scale.

2023 Hyundai Ioniq 5 Cupholder Mega Test: Will the Nalgene bottle fit?

I absolutely adore the Hyundai Ioniq 5, and so was excited to spend a week with it when the EV landed in my driveway. When I first drove the Ioniq 5 in San Diego, though, I hadn't packed my favorite style water bottle: the big 32-ounce Nalgene. Despite it being the best, its sheer size makes it less ideal when trying to pack light for a short trip. It also means it doesn't fit in most cars' cupholders, but, without the bottle on hand, I'd have to wait until this new opportunity with the Ioniq 5 to find out if it passes the Nalgene check. So, let's get to it. Starting at pole position — the front cupholders — we find ourselves unlucky so far. It's not even close to fitting. Not unusual, but our first option for convenient access to megahydration is denied. In most instances, our next best bet is the molded pockets in the front door panels. Here we have success. It's quite a tight fit, so while our drink won't be knocking or rolling around, it's not as easy as it could be to retrieve while driving, and I'll probably eventually wear out the little plastic tether connecting the lid to the bottle, as that's the easiest thing to grab without looking. Still, I'll give these door holders a pass. How about the folks sitting in back? Where can they stash their Nalgenes? No surprise about it not fitting in the center armrest cupholders after our inauspicious start with the fronts. The fact that it won't fit in the door panels is disappointing. C'est la vie. But one more thing ... you might have noticed another potential stash up front in the storage cubby below the center stack. The Nalgene fits in there just fine, but a little bit of extra room means the bottle will be knocking around. It's actually a decent spot, and more accessible than the doors.

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.