Roof Rack, Snorkel,and Ctis System on 2040-cars

Auto blog

GM, Pilot will build EVgo fast chargers at 500 truck stops across U.S.

All of our maps showing electric vehicle charging stations across the U.S. are going to need an update. Today, General Motors, Pilot and EVgo announced plans to work together on a nationwide DC fast charging network. The plan calls for 2,000 charging stalls that can deliver up to 350 kW to be installed at up to 500 Pilot and Flying J travel centers in the U.S. The goal is to have DC fast chargers available in 50-mile intervals across the country. The new charging stations will feature GM's "Ultium Charge 360" branding and "Pilot Flying J" logos but will not be limited to drivers of GM EVs. The plugs will use CCS connectors and be available to anyone. GM EV owners can take advantage of benefits, including the ability to make exclusive reservations, get discounts on charging costs and streamline the charging process with Plug and Charge and in-vehicle apps that can provide real-time charger availability. The first installation phase will take place in 2023, and "the bulk of the installations" should be completed by 2025, EVgo CEO Kathy Zoi said during a conference call with reporters announcing the plan. "We're gonna get going immediately and commence all of that engineering and planning stuff," she said. "We've got a pretty orderly plan." Pilot CEO Shameek Konar said the company expects the new EV charging stations to coexist with the current fuel infrastructure. "An average Pilot Flying J location is about 10 acres," Konar said. "This will be in addition to all of our gas pumps. The way I think about it is, this is a new source of energy that is going to coexist with gas for quite some time. We can debate how long, but we need to serve both groups of customers." Installing DC fast chargers at hundreds of Pilot's travel centers — aka truck stops — means there should be food, drinks, restrooms, WiFi and even showers available while you wait for an EV to charge. Pilot recently announced its “New Horizons” plan that will invest $1 billion in upgrading Pilot travel centers with more premium amenities, including expanded seating and lounge areas. While the exact amount of time it will take to charge an EV using these new stations will vary on the EV and its current state of charge, most EVs can refill from a low state of charge to around 80 percent in 20-30 minutes on a fast charger. The new stations are future-proofed to deliver up to 350 kW, a charge rate that few EVs today can handle.

How a New York cabby can get an MV-1 taxi for just $11k

AM General – the same company that's behind the Hummer – is making it easier for taxi drivers to buy one of its wheelchair accessible cabs in New York. Between the factory's own incentives and those offered by the city, the new MV-1 Empire Taxi can cost as little as $11,200. Unlike other vehicles that can be converted after production for handicapped mobility, the MV-1 is designed by AM General from the get-go as a wheelchair-accessible vehicle. Mobility Ventures LLC – the AM General subsidiary responsible for the MV-1 – displayed a yellow cab version at the New York Auto Show in 2012, and is now bringing it to market as the MV-1 Empire Taxi. Pricing has been announced, and it is rather competitive, to say the least. Mobility Ventures charges $33,000 for one of its wheelchair-accessibly taxis. But the NYC Taxi & Limousine Commission is offering a $14,000 grant toward the purchase of a wheelchair-accessible cab, bringing the purchase price down to $19,000. Of course, the Commission will offer the same incentives towards the purchase of any wheelchair-accessible vehicle, but converting an existing van for the purpose generally costs a good $10-20k. So while a Nissan NV200 Taxi of Tomorrow, for example, might start at under $30k, add in the cost of mobility conversion and you're looking at a lot more – a solid $10k more, according to Mobility Ventures. If the $19k purchase price isn't enough to get New York cabbies on board, the manufacturer and the commission are offering further incentives for some customers. For every wheelchair-bound passenger a driver picks up, the city will pay the cabby 50 cents – that may not sound like a lot, but it adds up over time. What's more, Mobility Ventures will match the incentive for the first 25 customers who buy an MV-1 Empire Taxi, which combined can come to as much as $7,800 in payments over the course of a year. Work that into the equation and the end cost of the new Empire Taxi could come out to just $11,200. Mobility Ventures is working with other cities to offer similar incentives, with negotiations currently under way in Washington with the DC Taxi Commission. Mobility Ventures Unveils New "MV-1 Empire Taxi" for NYC - More Legroom and Luggage Space Than any Other Taxi or Wheelchair Accessible Vehicle - Innovative Program will Match TLC Payments to Drivers for Every Ride in a Wheelchair Accessible Vehicle, Along with Special MV-1 Purchase Discounts NEW YORK, Jan.

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.