Hummer H3 4dr 4wd Suv Suv Manual Gasoline 3.5l Dohc, 5-cyl, Mf Boulder Gray Meta on 2040-cars

Auto blog

Mercedes moves R-Class production to AM General in Indiana

Go back a decade or two and you'd have seen the SUV market polarizing in opposite directions: hard-core off-roaders like the Hummer on the one hand, and passenger-focused crossovers like the Mercedes R-Class on the other. Now their fates are set to intertwine, at least as far as manufacturing is concerned. No longer producing Hummers, AM General (which designed and originally produced the Hummer) has been assigned the task of manufacturing the R-Class at its underused, 675,000 square-foot Commercial Assembly Plant in Mishawaka, IN – part of metropolitan South Bend. The decision was undertaken to allow Mercedes to free up production capacity at its plant in Tuscaloosa, AL, where it also produces the M-Class, GL-Class and C-Class, and where it will soon begin manufacturing the GLE Coupe. The vacation of the R-Class assembly line could be earmarked to make room for that new slant-roofed crossover (which was originally thought to be joining the Tuscaloosa plant as a fifth model) or could pave the way for another model to reach Alabama altogether. The multi-year arrangement to manufacture the R-Class makes AM General the first manufacturer contracted to build Mercedes-Benz vehicles in the US, but hardly the only one in the world. The G-Class – which could, incidentally, be characterized as the German equivalent of the Hummer – is built on Mercedes' behalf by Magna Steyr in Austria, and the company builds many of its passenger and commercial vehicles for local consumption under joint ventures in the Far East especially. The R-Class was first introduced in 2005, and though it's still built in America, it was removed from the company's US lineup back in 2012. However Mercedes confirms that, since 2013, it has been and remains available exclusively in China. That puts the R-Class in the rare position of being manufactured in the United States by (or now for) a foreign automaker but unavailable for sale here. AM General Selected As Mercedes-Benz First and Only Contract Manufacturer of Vehicles in the United States SOUTH BEND, Ind., Jan. 27, 2015 /PRNewswire/ -- AM General LLC and Mercedes-Benz U.S. International, Inc., today announced that Mercedes-Benz has selected AM General to manufacture the Mercedes-Benz R-Class luxury vehicle at AM General's world-class 675,000 square-foot Commercial Assembly Plant.

GMC Hummer EV will weigh 9,046 pounds

In the 2000s, Hummer's unique breed of off-roaders summoned a dark cloud of disapproval from environmentalists because they were gas-guzzling SUVs with mammoth dimensions. GMC's born-again Hummer EV will escape the gas guzzler label by running solely on electricity, but it will be even bigger and much heavier than its predecessors. Enthusiast site GM-Trucks reported the Hummer EV will tip the scale at 9,046 pounds (4,103 kilos if you're outside of the United States) in its quickest configuration, and a GMC spokesperson told Autoblog that figure is accurate. For context, the H1 Alpha released for 2006 (and often considered the ultimate Hummer) weighed 8,113 pounds, the H2 checked in at 6,614 pounds with the 6.2-liter V8, and the H3 was comparatively light at 4,600 pounds. When it lands, the Hummer EV will be one of the heaviest new cars sold in the United States. Part of its plumpness can be attributed to its colossal dimensions; it measures 216.8 inches long, 86.7 inches wide, and 81.1 inches tall. In comparison, the H1 stretched 185 inches long, 87 inches wide, and about 78 inches tall. The electric powertrain also played a major role in slinging the Hummer's weight into dually pickup territory. Batteries are heavy, and the Hummer EV's Ultium pack reportedly has a capacity of over 200 kilowatt hours. It has three electric motors, too. Note the 9,046-pound figure applies only to the sold-out Launch Edition model, which will offer 1,000 horsepower, the aforementioned 200-kilowatt battery, and the supercar-like ability to hit 60 mph from a stop in three seconds. GMC will launch cheaper, slower, and presumably considerably lighter variants of the truck in the early 2020s. Although SUVs are often heavier than comparable trucks due to the additional sheet metal, the people-hauling Hummer should weigh less than the cargo-carrying variant. As we reported in April 2021, its output will be limited to 830 horsepower because it's 20 inches shorter than the truck, and the bigger battery pack doesn't fit in this footprint.

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.