2009 Hummer H3 Alpha on 2040-cars

Auto blog

2022 Hummer EV Edition 1 pickups ready to go to customers

It's official: Two years after GM announced the electric GMC Hummer pickup, the first couple dozen units have left the line at the GM Factory Zero Detroit-Hamtramck Assembly Center, according to GM president Mark Reuss. In an interview with CNBC to celebrate the milestone, Reuss said 17 Hummer EVs are ready for delivery to customers. This makes the Hummer the first of GM's new Ultium-based EVs to leave the factory, and the second electric pickup on the market after the Rivian R1T. The first 1,200 Hummer EVs made will be Edition 1 models, all of which are Interstellar White outside with Lunar Horizon interiors and bronze badging. Each of the $112,595 pickups is powered by three Ultium motors producing a GM-estimated 1,000 horsepower and 11,500 pound-feet of torque, loaded with features like height-adjusting adaptive suspension, skid rails and rock sliders, 35-inch tires, the diagonal-driving CrabWalk, the launch control system Watts to Freedom that unlocks a three-second sprint to 60 miles per hour, and Super Cruise. Range is a GM-estimated 329 miles when the 200-kWh battery is fully charged. As these filter out to eager owners, GM is prepping the next four phases of the Hummer rollout. About a year from now, in autumn of 2022, Factory Zero will begin production of the first widely available Hummer, the EV3X pickup that starts at $99,995 before destination. Three Ultium motors will provide an estimated 800 horsepower and 9,500 pound-feet of torque to a range estimated beyond 300 miles. Spring of 2023 is expected to deliver the Hummer EV2X pickup at an MSRP of $89,995, utilizing two motors producing a total 625 hp and 7,400 lb-ft over a range also estimated to go beyond 300 miles. Around the same time, the first units of the $105,595 Hummer SUV Edition 1 are planned to head down lines at Factory Zero. Finally, in the spring of 2024, the entry-level $79,995 Hummer EV2 pickup and its two-motor powertrain should arrive, making the same output as the EV2X, but only good for a range of around 250 miles. That won't be all we see from Factory Zero, either. GM invested $2.2 billion in the Detroit-Hamtramck plant that once built bread-and-butter GM fare like the Chevrolet Impala, Buick LaCrosse, and Oldsmobile Toronado in order to turn the facility into its first EV base of manufacturing operations for Ultium products. The battery-electric Chevrolet Silverado and GMC Sierra pickups will be built there, as will the Cruise Origin robotaxi.

Which electric cars can charge at a Tesla Supercharger?

The difference between Tesla charging and non-Tesla charging. Electrify America; Tesla Tesla's advantage has long been its charging technology and Supercharger network. Now, more and more automakers are switching to Tesla's charging tech. But there are a few things non-Tesla drivers need to know about charging at a Tesla station. A lot has hit the news cycle in recent months with regard to electric car drivers and where they can and can't plug in. The key factor in all of that? Whether automakers switched to Tesla's charging standard. More car companies are shifting to Tesla's charging tech in the hopes of boosting their customers' confidence in going electric.  Here's what it boils down to: If you currently drive a Tesla, you can keep charging at Tesla charging locations, which use the company's North American Charging Standard (NACS), which has long served it well. The chargers are thinner, more lightweight and easier to wrangle than other brands.  If you currently drive a non-Tesla EV, you have to charge at a non-Tesla charging station like that of Electrify America or EVgo — which use the Combined Charging System (CCS) — unless you stumble upon a Tesla charger already equipped with the Magic Dock adapter. For years, CCS tech dominated EVs from everyone but Tesla.  Starting next year, if you drive a non-Tesla EV (from the automakers that have announced they'll make the switch), you'll be able to charge at all Supercharger locations with an adapter. And by 2025, EVs from some automakers won't even need an adaptor.  Here's how to charge up, depending on which EV you have:  Ford 2021 Ford Mustang Mach-E. Tim Levin/Insider Ford was the earliest traditional automaker to team up with Tesla for its charging tech. Current Ford EV owners — those driving a Ford electric vehicle already fitted with a CCS port — will be able to use a Tesla-developed adapter to access Tesla Superchargers starting in the spring. That means that, if you own a Mustang Mach-E or Ford F-150 Lightning, you will need the adapter in order to use a Tesla station come 2024. But Ford will equip its future EVs with the NACS port starting in 2025 — eliminating the need for any adapter. Owners of new Ford EVs will be able to pull into a Supercharger station and juice up, no problem. General Motors Cadillac Lyriq. Cadillac GM will also allow its EV drivers to plug into Tesla stations.

Mil-Spec 003 First Drive Review | The ultimate Hummer H1

We're in something of a golden age for automotive restomodding, and into a heady mix that includes Singer's reimagined 911s, Icon's fancy off-roaders, and lots of updated Land Rovers. The latest company with ambitions to become a top-tier custom car brand is Mil-Spec, which aims to do what the aforementioned companies do, but with the big, brash, blunt Hummer H1. And in particular, the company is aiming to make its Hummers a compelling alternative to a used Hummer H1 Alpha. The Alpha is generally considered to be the best of the breed with the most powerful diesel engine offered, larger brakes, and a nicer interior compared with its predecessors. To find out whether the company's early efforts live up to that ambition, Mil-Spec invited us to drive their third completed vehicle, Mil-Spec 003. It started life as a 1995 Hummer H1, and as with all of Mil-Spec's vehicles, it was completely disassembled, and the body and frame media-blasted down to metal. The frame and related components are then powder-coated with a black gloss finish. The truck's aluminum body, in this case a four-door hardtop pickup variant, but is coated in a resilient bedliner-like material designed for easy care. Bits of Kevlar are mixed in with the material for strength, and it can be tinted different colors and have rougher or finer textures. Underneath the body, one of the five different engines that were available on the H1, usually a diesel V8, is replaced with a 6.6-liter Duramax LBZ turbodiesel V8. This engine was available on heavy duty Chevy and GMC pickup trucks, and a related engine was used in the Hummer H1 Alpha. Whereas the engine in the H1 Alpha made 300 horsepower and 520 pound-feet of torque mated to a 5-speed automatic, the Mil-Spec's LBZ has had turbo upgrades and a different ECU tune allowing it to produce 500 horsepower and 1,000 pound-feet of torque. It's also coupled to an Allison 1000 6-speed automatic transmission. The mechanical upgrades don't stop with the engine and transmission. The inboard brakes are given drilled and vented discs, and an ARB Air Locker locking rear differential fitted. Dual auxiliary transmission coolers also make an appearance and can be switched on as needed. The 003 received 20-inch wheels with 38-inch mud terrain tires, but larger tires can be added if desired.