2007 Hummer H3 4x4 on 2040-cars

Auto blog

GMC teases Hummer EV's removable roof panels

Today was supposed to be the day that GM took the wraps off its GMC Hummer EV. We were told as much during the Super Bowl commercial, but GM revised it to an undecided future date, citing the coronavirus as the reason. Instead of the big reveal, we have a teaser.  The Hummer EV is going to feature removable roof panels, and now we get a better look at them. There are four roof panels and a front T-bar that come out of the truck. You can see what that looks like in the video at the top of this post. Comparisons to Jeep are obvious as the open-air experience is likely similar to the Gladiator and Wrangler with their hardtop roof panels removed. That zero-limits slogan makes a bit of sense from this respect. With the sheer number of roof panels, we suspect a single person will be able to remove them alone. In addition to the video of the roof, we get a small peek at the massive digital screens the Hummer will be sporting. Check them out at the bottom of the photo below. They appear to be two large slabs, separate from each other. Other details are scarce on the ground. We’re not sure when the Hummer will make its grand entrance at this point, but are still excited to see the 1,000-horsepower truck hit the road. GMC is still advertising the 0-60 mph time of just 3 seconds, too. The latest tidbit of news suggests that further teasers might be coming, so we could be in for a rather drawn out reveal process. Our senior green editor John Snyder got to see the GMC Hummer in person earlier this year at GMÂ’s EV Day and described it like this: “ItÂ’s a big, off-road-ready pickup complete with giant all-terrain rubber and tow hooks. It features removable roof panels for access to the open sky, which appears to be depicted in the teaser above. It features sail panels behind the C-pillars, similar to those on the Chevy Avalanche and Honda Ridgeline. Its bed was concealed with a tonneau cover, but it sported GMCÂ’s MultiPro tailgate that we first saw on the Sierra Denali. Interior photos showed a spacious interior with blocky shapes, squared hourglass vents that mirror the look of the taillights and a lunar theme that incorporates the topography of the Sea of Tranquility into things like the floor mats and speaker covers. It also has a large infotainment screen as well as a digital instrument panel.” Related video:

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.

GM, Pilot will build EVgo fast chargers at 500 truck stops across U.S.

All of our maps showing electric vehicle charging stations across the U.S. are going to need an update. Today, General Motors, Pilot and EVgo announced plans to work together on a nationwide DC fast charging network. The plan calls for 2,000 charging stalls that can deliver up to 350 kW to be installed at up to 500 Pilot and Flying J travel centers in the U.S. The goal is to have DC fast chargers available in 50-mile intervals across the country. The new charging stations will feature GM's "Ultium Charge 360" branding and "Pilot Flying J" logos but will not be limited to drivers of GM EVs. The plugs will use CCS connectors and be available to anyone. GM EV owners can take advantage of benefits, including the ability to make exclusive reservations, get discounts on charging costs and streamline the charging process with Plug and Charge and in-vehicle apps that can provide real-time charger availability. The first installation phase will take place in 2023, and "the bulk of the installations" should be completed by 2025, EVgo CEO Kathy Zoi said during a conference call with reporters announcing the plan. "We're gonna get going immediately and commence all of that engineering and planning stuff," she said. "We've got a pretty orderly plan." Pilot CEO Shameek Konar said the company expects the new EV charging stations to coexist with the current fuel infrastructure. "An average Pilot Flying J location is about 10 acres," Konar said. "This will be in addition to all of our gas pumps. The way I think about it is, this is a new source of energy that is going to coexist with gas for quite some time. We can debate how long, but we need to serve both groups of customers." Installing DC fast chargers at hundreds of Pilot's travel centers — aka truck stops — means there should be food, drinks, restrooms, WiFi and even showers available while you wait for an EV to charge. Pilot recently announced its “New Horizons” plan that will invest $1 billion in upgrading Pilot travel centers with more premium amenities, including expanded seating and lounge areas. While the exact amount of time it will take to charge an EV using these new stations will vary on the EV and its current state of charge, most EVs can refill from a low state of charge to around 80 percent in 20-30 minutes on a fast charger. The new stations are future-proofed to deliver up to 350 kW, a charge rate that few EVs today can handle.