2003 Hummer H2-very Desired Sage Green Metallic Paint-recent Air Suspension Svc! on 2040-cars

Auto blog

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.

2023 Hyundai Ioniq 5 Cupholder Mega Test: Will the Nalgene bottle fit?

I absolutely adore the Hyundai Ioniq 5, and so was excited to spend a week with it when the EV landed in my driveway. When I first drove the Ioniq 5 in San Diego, though, I hadn't packed my favorite style water bottle: the big 32-ounce Nalgene. Despite it being the best, its sheer size makes it less ideal when trying to pack light for a short trip. It also means it doesn't fit in most cars' cupholders, but, without the bottle on hand, I'd have to wait until this new opportunity with the Ioniq 5 to find out if it passes the Nalgene check. So, let's get to it. Starting at pole position — the front cupholders — we find ourselves unlucky so far. It's not even close to fitting. Not unusual, but our first option for convenient access to megahydration is denied. In most instances, our next best bet is the molded pockets in the front door panels. Here we have success. It's quite a tight fit, so while our drink won't be knocking or rolling around, it's not as easy as it could be to retrieve while driving, and I'll probably eventually wear out the little plastic tether connecting the lid to the bottle, as that's the easiest thing to grab without looking. Still, I'll give these door holders a pass. How about the folks sitting in back? Where can they stash their Nalgenes? No surprise about it not fitting in the center armrest cupholders after our inauspicious start with the fronts. The fact that it won't fit in the door panels is disappointing. C'est la vie. But one more thing ... you might have noticed another potential stash up front in the storage cubby below the center stack. The Nalgene fits in there just fine, but a little bit of extra room means the bottle will be knocking around. It's actually a decent spot, and more accessible than the doors.

Mercedes moves R-Class production to AM General in Indiana

Go back a decade or two and you'd have seen the SUV market polarizing in opposite directions: hard-core off-roaders like the Hummer on the one hand, and passenger-focused crossovers like the Mercedes R-Class on the other. Now their fates are set to intertwine, at least as far as manufacturing is concerned. No longer producing Hummers, AM General (which designed and originally produced the Hummer) has been assigned the task of manufacturing the R-Class at its underused, 675,000 square-foot Commercial Assembly Plant in Mishawaka, IN – part of metropolitan South Bend. The decision was undertaken to allow Mercedes to free up production capacity at its plant in Tuscaloosa, AL, where it also produces the M-Class, GL-Class and C-Class, and where it will soon begin manufacturing the GLE Coupe. The vacation of the R-Class assembly line could be earmarked to make room for that new slant-roofed crossover (which was originally thought to be joining the Tuscaloosa plant as a fifth model) or could pave the way for another model to reach Alabama altogether. The multi-year arrangement to manufacture the R-Class makes AM General the first manufacturer contracted to build Mercedes-Benz vehicles in the US, but hardly the only one in the world. The G-Class – which could, incidentally, be characterized as the German equivalent of the Hummer – is built on Mercedes' behalf by Magna Steyr in Austria, and the company builds many of its passenger and commercial vehicles for local consumption under joint ventures in the Far East especially. The R-Class was first introduced in 2005, and though it's still built in America, it was removed from the company's US lineup back in 2012. However Mercedes confirms that, since 2013, it has been and remains available exclusively in China. That puts the R-Class in the rare position of being manufactured in the United States by (or now for) a foreign automaker but unavailable for sale here. AM General Selected As Mercedes-Benz First and Only Contract Manufacturer of Vehicles in the United States SOUTH BEND, Ind., Jan. 27, 2015 /PRNewswire/ -- AM General LLC and Mercedes-Benz U.S. International, Inc., today announced that Mercedes-Benz has selected AM General to manufacture the Mercedes-Benz R-Class luxury vehicle at AM General's world-class 675,000 square-foot Commercial Assembly Plant.