2018 Honda Pilot Lx Sport Utility 4d on 2040-cars

Auto blog

Honda S660 set for Yokkaichi production next year

Roadsters, you might argue, are best when they're small and nimble. If you're thinking of the Mazda MX-5 Miata, you're on the right track, but there have been even smaller ones: pint-sized, three-cylinder roadsters like the Daihatsu Copen, Suzuki Cappuccino and Smart Roadster. But the most iconic and enduring of them was surely the Honda Beat.
Designed by Pininfarina, the Beat was - not unlike the F40 was for Enzo Ferrari - the last car approved for production by company founder Soichiro Honda. It complied with Japan's strict Kei car regulations and packed a tiny, naturally aspirated 656 cc that produced just 63 horsepower. The cult classic ended production in 1996, but six months ago Honda hinted at a revival with the presentation of the S660 concept at the 2013 Tokyo Motor Show. Now it seems Honda - or Yachiyo, we should say - is gearing up to put it into production at the same factory that produced the Beat two decades ago.
That plant is the Yokkaichi factory, a facility owned by Yachiyo Industry Co., Ltd. that builds small cars on contract for Honda. It was slated for a major expansion a few years ago until Honda shifted some of its small car production to its own plant in Suzuka, but continues to build the N series of boxy, upright hatchbacks, as well as small commercial vehicles like the Life and Vamos lines. The reintroduction of a small roadster line to the factory's output sometime in 2015 will undoubtedly be a cause for celebration in Yokkaichi. For our part we can only hope that American Honda CEO Tetsuo Iwamura gets his way and manages to bring the S660 to the US in the near future.

Why Acura should build a hybrid Integra successor using NSX tech

Yes, it sounds like a heresy. Yes, the Honda CR-Z was not a good hybrid sports car. Yes, we know the RSX officially replaced the Integra here (but was called the Integra in Japan). But, no, we're not crazy. Well, maybe a little bit. But hear us out. At the moment Acura is a bit of an unfocused mess. Its line-up is thoroughly uninspiring, save for its $200,000 NSX supercar – a great mid-engined supercar with an impressive, performance-oriented hybrid AWD system. And yet few people would draw a line connecting Acura's other SH-AWD hybrids, the RLX Sport Hybrid and MDX Sport Hybrid, to the NSX. The first NSX told the world that Acura built cars with world-class technology and performance, and the Integra carried it to people with normal pocketbooks. Since the new NSX communicates a similar message as its forbearer, so too would a new Integra. Now making an entry-level sports car with hybrid technology is tricky business. As we already established, the Honda CR-Z was a colossal flop. It's balance was all off: heavy, expensive, and not very sporty – and it didn't even get very good fuel economy. However, Honda and Acura can learn from these mistakes. First, to keep costs in check, Acura can borrow from Honda's ever-improving parts bin. It would logical to borrow the excellent Civic coupe platform – something the old Integra did as well. It could also attach the proposed hybrid powertrain to the upcoming Si turbocharged four-cylinder. Some added cost will be unavoidable, since the batteries and motors will have to go somewhere. That will cost some engineering dollars, and inflate the price tag a bit. However, since Acura is a premium brand, it has some wiggle room to bump up the price without losing buyers. Weight is another potential issue this hypothetical hybrid will face, and was one of the chief complaints with the CR-Z. Looking at the RLX and the RLX Sport Hybrid, the hybrid bits weigh about an extra 340 pounds. That's not insignificant, but added to the turbocharged Civic EX-T coupe's 2,900 pound curb weight, you would have a car that would weigh 3,240 pounds. That's comparable to the very fun Mustang EcoBoost. As long as Acura keeps the weight under 3,500 pounds, the brand should have an entertaining coupe on its hands. The final piece of the puzzle is to make sure it isn't compromised. Every bit of hybrid tech in the NSX is there for performance. It helps eliminate turbo lag, and it improves acceleration and handling.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.