Honda Odyssey Ex-l Fwd Minivan (5 Dr), 3.5l V6 Call Dave Donnelly (336) 669-2143 on 2040-cars

Auto blog

New Land Rover Defender aces Euro crash tests

While the 2020 Land Rover Defender has not yet been crash-test by U.S. safety agencies such as NHTSA or IIHS, we do now have results for Europe's NCAP crash tests and accident-avoidance tests, where the Defender earned the top rating of five stars. The Defender model used for NCAP testing was the 110 variant with right-hand drive. The NCAP regimen includes several different crash tests: an offset front crash test into a moveable barrier with both the vehicle and the barrier traveling at 50 km/hr (31 mph), a front crash test into a full-width fixed barrier at 50 km/hr (31 mph), a side-impact crash test with a barrier traveling at 60 km/hr (37 mph) hitting the driver's door, and a side-impact test where the car strikes a pole at 32 km/hr (20 mph). The Defender's scores for the adult occupant and for a child occupant were both 85%. Additionally, the agency looks at the severity of injuries of the vehicle striking a pedestrian, taking data for a pedestrian's head hitting the hood, and their upper and lower leg being hit by the front of the vehicle. There is also testing of the vehicle's automatic emergency braking system's ability to avoiding hitting a pedestrian and a cyclist under various scenarios. The efficacy of active-safety systems for avoiding collisions with other vehicles is also tested. The Defender's score for protecting pedestrians and cyclists was 71%. The driver assists scored 79%. Results for several European-market cars were released together with those for the Defender, the most noteworthy of which was for the Honda E. The electric city car fared less well than the big Land Rover, garnering a score of four stars overall. In the same battery of test, the Honda E scored 76% for adult occupant protection, 82% for a child occupant, 62% for protecting pedestrians and cyclists, and 65% for its driver assists. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Ward's reveals annual 10 Best Engines list for 2013

Ward's Auto has released its annual 10 Best Engines award winners. The 2013 list covers the full width and breadth of the internal combustion spectrum, from a spate of efficient four-cylinders to the most powerful production V8 on the planet. As always, the entries must be available in a production vehicle in the first quarter of 2013 with an MSRP of less than $55,000. The supercharged 3.0-liter V6 from the Audi S5 held on for the fourth consecutive year, and BMW earned two spots on the list with its turbo 2.0-liter four-cylinder and turbo 3.0-liter inline-six.
Ford pulled in two awards for its 2.0-liter EcoBoost four-cylinder and and the supercharged 5.8-liter V8 from the Shelby GT500. Honda matched BMW and Ford with two wins of its own. Wards awarded the 2.4-liter four-cylinder from the Honda Accord Sport as well as the 3.5-liter V6 from the Honda Accord. Chrysler, General Motors and Subaru each garnered a spot on the list as well for the 3.6-liter V6 in the Ram 1500, the turbo 2.0-liter four-cylinder in the Cadillac ATS and the 2.0-liter four-cylinder the Subaru BRZ, respectively. You can read the full press release below for more information.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.