89919 Miles Leather 7-passenger Dvd Res Dual Climate Sun Roof 6-disc Power Doors on 2040-cars

Auto blog

Honda MC-? will use solar-powered chargers in 'micro' EV tests

Honda is envisioning what it calls a CO2-free society and, not surprisingly, it's a rather sunny one, in one Japanese city, at least. The Japanese automaker is kicking off a test program with the micro-electric-vehicle that will use power generated via photovoltaic energy collected and stored at EV charging stations. Yes, the big old sun will power those little-bitty MC-? cars. MC-? is shorthand for "Micro Computer Beta" and the car is certainly an appropriate vehicle for these tests. The car is 98 inches long (about eight inches shorter than a Smart ForTwo) and has a 43-mile-per-hour top speed as well as an electric motor that delivers a meager eight horsepower. The car is designed to meet Europe's quadricycle regulations and has a 50-mile single-charge range. No word on if or when it'll go into production, of course, but Honda and Toshiba are working with Japan's Miyakojima City on the project, with Toshiba responsible for building three solar-powered EV-charging stations. The Japanese automaker unveiled the latest incarnation of the 1+1 tandem-seating-arrangement MC-? last fall. You can see our "Quick Spin" impressions of the model here and read Honda's press release below. Honda Begins Experimental Test-driving of MC-? Micro-sized EV Using Renewable Energy TOKYO, Japan, January 28, 2014 - Jointly with Miyakojima City and Toshiba Corporation, Honda Motor Co., Ltd. began experimental test-driving of the MC-?, Honda's micro-sized EV, using photovoltaic (PV) energy as part of the Miyakojima City Small-sized Electromotive Mobility Project*1. Through this experimental program, Honda will operate an environmentally-responsible micro-sized EV using renewable energy, and work together with the local community to explore the possibility of a CO2-free society. In November 2013, Honda began separate field tests jointly conducted with Kumamoto Prefecture, Saitama City and Miyakojima City using the MC-?. For the field tests in Miyakojima City, as a part of the initiative as an environmentally-responsible model city, the feasibility of the introduction and utilization of small-sized electromotive mobility products and electricity supply facilities are being verified. For this particular driving experiment in the city using renewable energy, the MC-? will be charged from three new PV recharging stations newly built by Toshiba.

Honda making hydrogen from solar power in UK

Honda is going to launch a hydrogen-powered production vehicle (its second, really) next year, but the all-important H2 infrastructure question hasn't been fully answered yet. One possible solution is being tested over in the United Kingdom, where Honda is turning solar energy and water into hydrogen at its Swindon plant. SHD Logistics says the plant is the UK's "first commercial-scale hydrogen production and refuelling facility powered by solar energy." Despite the presence of an FCX Clarity in some pictures from the ribbon cutting, it's unclear if the station will be able to fuel any passenger cars. SHD Logistics talks about sending the hydrogen from where it is generated on the Honda plant grounds into the plant using 300-meter underground pipes so that hydrogen forklifts can refuel as needed. Two hydrogen fuel cell trucks used by Briggs Equipment UK, Honda's partner in the station, will also refuel at the plant. Honda said earlier this year that it, along with partner GM, would work to reduce the costs of a hydrogen refueling infrastructure. Solar-powered hydrolysis – which is what the Swindon facility uses – doesn't sound cheap to us, but at least it reduces the overall environmental costs, compared to using electricity generated from fossil fuels.

Honda working with new supplier Autoliv for Takata inflator recall

Takata is fighting against US regulators over whether to expand its airbag inflator recall nationwide, but the affected automakers are continuing to broaden their own campaigns to get these vehicles fixed. Honda is the first company to take the bold move of partnering with another supplier for its replacement parts. It just announced plans to work with Autoliv to create components for models needing repaired in the US. "The agreement is made in order to meet the expanded supply of inflators needed by Honda and is subject to definitive documentation," Autoliv said in a statement. The company plans to add the extra capacity for these replacement parts at its existing factories, and deliveries are expected to begin in six months. The decision to switch suppliers was quite surprising because the choice was largely considered impractical previously. Automakers believed that changing manufacturers could take as long as a year or more to implement. However, Autoliv apparently found a way to accelerate that. According to Reuters, Honda said at a hearing in the House of Representatives on December 3 (pictured above) that it was in talks with Autoliv and another supplier called Daicel about building more inflators. The extra parts are sure to come in handy for Honda, as it is now officially expanding its driver side inflator recall nationwide. Although, that that option was already available to any concerned drivers who asked for the remedy. Even with added capacity, Takata had estimated it would take two years to manufacturer enough replacements to fix all of the affected vehicles from all of the automakers. Scroll down to read Autoliv's statement on its new role. Autoliv to supply replacement airbag inflators to be used by Honda (Stockholm, December 3, 2014) – – – Autoliv, Inc. (NYSE: ALV, and SSE: ALIV sdb), the worldwide leader in automotive safety, will supply replacement airbag inflators to be used by Honda Motor Company in support of the ongoing field action initiatives in the United States. The agreement is made in order to meet the expanded supply of inflators needed by Honda and is subject to definitive documentation. In order to be able to meet increased demand, Autoliv will build additional inflator capacity in its existing manufacturing facilities. Deliveries are estimated to commence after a period of about six months from today.